/* ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /** * @file USARTv3/hal_serial_lld.h * @brief STM32 low level serial driver header. * * @addtogroup SERIAL * @{ */ #ifndef HAL_SERIAL_LLD_H #define HAL_SERIAL_LLD_H #if HAL_USE_SERIAL || defined(__DOXYGEN__) #include "stm32_usart.h" /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ /** * @brief Advanced buffering support switch. * @details This constants enables the advanced buffering support in the * low level driver, the queue buffer is no more part of the * @p SerialDriver structure, each driver can have a different * queue size. */ #define SERIAL_ADVANCED_BUFFERING_SUPPORT TRUE /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ /** * @name Configuration options * @{ */ /** * @brief USART1 driver enable switch. * @details If set to @p TRUE the support for USART1 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_USART1 FALSE #endif /** * @brief USART2 driver enable switch. * @details If set to @p TRUE the support for USART2 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_USART2 FALSE #endif /** * @brief USART3 driver enable switch. * @details If set to @p TRUE the support for USART3 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_USART3 FALSE #endif /** * @brief UART4 driver enable switch. * @details If set to @p TRUE the support for UART4 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_UART4 FALSE #endif /** * @brief UART5 driver enable switch. * @details If set to @p TRUE the support for UART5 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_UART5 FALSE #endif /** * @brief USART6 driver enable switch. * @details If set to @p TRUE the support for USART6 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_USART6 FALSE #endif /** * @brief UART7 driver enable switch. * @details If set to @p TRUE the support for UART7 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_UART7) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_UART7 FALSE #endif /** * @brief UART8 driver enable switch. * @details If set to @p TRUE the support for UART8 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_UART8) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_UART8 FALSE #endif /** * @brief UART9 driver enable switch. * @details If set to @p TRUE the support for UART9 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_UART9) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_UART9 FALSE #endif /** * @brief USART10 driver enable switch. * @details If set to @p TRUE the support for USART10 is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_USART10) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_USART10 FALSE #endif /** * @brief LPUART1 driver enable switch. * @details If set to @p TRUE the support for LPUART is included. * @note The default is @p FALSE. */ #if !defined(STM32_SERIAL_USE_LPUART1) || defined(__DOXYGEN__) #define STM32_SERIAL_USE_LPUART1 FALSE #endif /** * @brief USART1 interrupt priority level setting. */ #if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_USART1_PRIORITY 12 #endif /** * @brief USART2 interrupt priority level setting. */ #if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_USART2_PRIORITY 12 #endif /** * @brief USART3 interrupt priority level setting. */ #if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_USART3_PRIORITY 12 #endif /** * @brief UART4 interrupt priority level setting. */ #if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_UART4_PRIORITY 12 #endif /** * @brief UART5 interrupt priority level setting. */ #if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_UART5_PRIORITY 12 #endif /** * @brief USART6 interrupt priority level setting. */ #if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_USART6_PRIORITY 12 #endif /** * @brief UART7 interrupt priority level setting. */ #if !defined(STM32_SERIAL_UART7_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_UART7_PRIORITY 12 #endif /** * @brief UART8 interrupt priority level setting. */ #if !defined(STM32_SERIAL_UART8_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_UART8_PRIORITY 12 #endif /** * @brief UART9 interrupt priority level setting. */ #if !defined(STM32_SERIAL_UART9_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_UART9_PRIORITY 12 #endif /** * @brief USART10 interrupt priority level setting. */ #if !defined(STM32_SERIAL_USART10_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_USART10_PRIORITY 12 #endif /** * @brief LPUART1 interrupt priority level setting. */ #if !defined(STM32_SERIAL_LPUART1_PRIORITY) || defined(__DOXYGEN__) #define STM32_SERIAL_LPUART1_PRIORITY 12 #endif /** * @brief Input buffer size for USART1. */ #if !defined(STM32_SERIAL_USART1_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART1_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for USART1. */ #if !defined(STM32_SERIAL_USART1_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART1_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for USART2. */ #if !defined(STM32_SERIAL_USART2_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART2_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for USART2. */ #if !defined(STM32_SERIAL_USART2_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART2_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for USART3. */ #if !defined(STM32_SERIAL_USART3_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART3_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for USART3. */ #if !defined(STM32_SERIAL_USART3_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART3_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for UART4. */ #if !defined(STM32_SERIAL_UART4_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART4_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for UART4. */ #if !defined(STM32_SERIAL_UART4_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART4_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for UART5. */ #if !defined(STM32_SERIAL_UART5_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART5_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for UART5. */ #if !defined(STM32_SERIAL_UART5_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART5_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for USART6. */ #if !defined(STM32_SERIAL_USART6_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART6_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for USART6. */ #if !defined(STM32_SERIAL_USART6_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART6_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for UART7. */ #if !defined(STM32_SERIAL_UART7_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART7_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for UART7. */ #if !defined(STM32_SERIAL_UART7_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART7_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for UART8. */ #if !defined(STM32_SERIAL_UART8_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART8_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for UART8. */ #if !defined(STM32_SERIAL_UART8_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART8_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for UART9. */ #if !defined(STM32_SERIAL_UART9_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART9_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for UART9. */ #if !defined(STM32_SERIAL_UART9_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_UART9_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for USART10. */ #if !defined(STM32_SERIAL_USART10_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART10_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for USART10. */ #if !defined(STM32_SERIAL_USART10_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_USART10_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Input buffer size for LPUART1. */ #if !defined(STM32_SERIAL_LPUART1_IN_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_LPUART1_IN_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** * @brief Output buffer size for LPUART1. */ #if !defined(STM32_SERIAL_LPUART1_OUT_BUF_SIZE) || defined(__DOXYGEN__) #define STM32_SERIAL_LPUART1_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE #endif /** @} */ /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ #if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1 #error "USART1 not present in the selected device" #endif #if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2 #error "USART2 not present in the selected device" #endif #if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3 #error "USART3 not present in the selected device" #endif #if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4 #error "UART4 not present in the selected device" #endif #if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5 #error "UART5 not present in the selected device" #endif #if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6 #error "USART6 not present in the selected device" #endif #if STM32_SERIAL_USE_UART7 && !STM32_HAS_UART7 #error "UART7 not present in the selected device" #endif #if STM32_SERIAL_USE_UART8 && !STM32_HAS_UART8 #error "UART8 not present in the selected device" #endif #if STM32_SERIAL_USE_UART9 && !STM32_HAS_UART9 #error "UART9 not present in the selected device" #endif #if STM32_SERIAL_USE_USART10 && !STM32_HAS_USART10 #error "USART10 not present in the selected device" #endif #if STM32_SERIAL_USE_LPUART1 && !STM32_HAS_LPUART1 #error "LPUART1 not present in the selected device" #endif #if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && \ !STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && \ !STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6 && \ !STM32_SERIAL_USE_UART7 && !STM32_SERIAL_USE_UART8 && \ !STM32_SERIAL_USE_UART9 && !STM32_SERIAL_USE_USART10 && \ !STM32_SERIAL_USE_LPUART1 #error "SERIAL driver activated but no USART/UART peripheral assigned" #endif #if !defined(STM32_USART1_SUPPRESS_ISR) && \ STM32_SERIAL_USE_USART1 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_USART1_PRIORITY) #error "Invalid IRQ priority assigned to USART1" #endif #if !defined(STM32_USART2_SUPPRESS_ISR) && \ STM32_SERIAL_USE_USART2 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_USART2_PRIORITY) #error "Invalid IRQ priority assigned to USART2" #endif #if !defined(STM32_USART3_SUPPRESS_ISR) && \ STM32_SERIAL_USE_USART3 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_USART3_PRIORITY) #error "Invalid IRQ priority assigned to USART3" #endif #if !defined(STM32_UART4_SUPPRESS_ISR) && \ STM32_SERIAL_USE_UART4 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_UART4_PRIORITY) #error "Invalid IRQ priority assigned to UART4" #endif #if !defined(STM32_UART5_SUPPRESS_ISR) && \ STM32_SERIAL_USE_UART5 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_UART5_PRIORITY) #error "Invalid IRQ priority assigned to UART5" #endif #if !defined(STM32_USART6_SUPPRESS_ISR) && \ STM32_SERIAL_USE_USART6 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_USART6_PRIORITY) #error "Invalid IRQ priority assigned to USART6" #endif #if !defined(STM32_UART7_SUPPRESS_ISR) && \ STM32_SERIAL_USE_UART7 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_UART7_PRIORITY) #error "Invalid IRQ priority assigned to UART7" #endif #if !defined(STM32_UART8_SUPPRESS_ISR) && \ STM32_SERIAL_USE_UART8 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_UART8_PRIORITY) #error "Invalid IRQ priority assigned to UART8" #endif #if !defined(STM32_UART9_SUPPRESS_ISR) && \ STM32_SERIAL_USE_UART9 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_UART9_PRIORITY) #error "Invalid IRQ priority assigned to UART9" #endif #if !defined(STM32_USART10_SUPPRESS_ISR) && \ STM32_SERIAL_USE_USART10 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_USART10_PRIORITY) #error "Invalid IRQ priority assigned to USART10" #endif #if !defined(STM32_LPUART1_SUPPRESS_ISR) && \ STM32_SERIAL_USE_LPUART1 && \ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SERIAL_LPUART1_PRIORITY) #error "Invalid IRQ priority assigned to LPUART1" #endif /* Checks on allocation of USARTx units.*/ #if STM32_SERIAL_USE_USART1 #if defined(STM32_USART1_IS_USED) #error "SD1 requires USART1 but it is already used" #else #define STM32_USART1_IS_USED #endif #endif #if STM32_SERIAL_USE_USART2 #if defined(STM32_USART2_IS_USED) #error "SD2 requires USART2 but it is already used" #else #define STM32_USART2_IS_USED #endif #endif #if STM32_SERIAL_USE_USART3 #if defined(STM32_USART3_IS_USED) #error "SD3 requires USART3 but it is already used" #else #define STM32_USART3_IS_USED #endif #endif #if STM32_SERIAL_USE_UART4 #if defined(STM32_UART4_IS_USED) #error "SD4 requires UART4 but it is already used" #else #define STM32_UART4_IS_USED #endif #endif #if STM32_SERIAL_USE_UART5 #if defined(STM32_UART5_IS_USED) #error "SD5 requires UART5 but it is already used" #else #define STM32_UART5_IS_USED #endif #endif #if STM32_SERIAL_USE_USART6 #if defined(STM32_USART6_IS_USED) #error "SD6 requires USART6 but it is already used" #else #define STM32_USART6_IS_USED #endif #endif #if STM32_SERIAL_USE_UART7 #if defined(STM32_UART7_IS_USED) #error "SD7 requires UART7 but it is already used" #else #define STM32_UART7_IS_USED #endif #endif #if STM32_SERIAL_USE_UART8 #if defined(STM32_UART8_IS_USED) #error "SD8 requires UART8 but it is already used" #else #define STM32_UART8_IS_USED #endif #endif #if STM32_SERIAL_USE_UART9 #if defined(STM32_UART9_IS_USED) #error "SD9 requires UART9 but it is already used" #else #define STM32_UART9_IS_USED #endif #endif #if STM32_SERIAL_USE_USART10 #if defined(STM32_USART10_IS_USED) #error "SD10 requires USART10 but it is already used" #else #define STM32_USART10_IS_USED #endif #endif #if STM32_SERIAL_USE_LPUART1 #if defined(STM32_LPUART1_IS_USED) #error "LPSD1 requires LPUART1 but it is already used" #else #define STM32_LPUART1_IS_USED #endif #endif /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ /** * @brief STM32 Serial Driver configuration structure. * @details An instance of this structure must be passed to @p sdStart() * in order to configure and start a serial driver operations. * @note This structure content is architecture dependent, each driver * implementation defines its own version and the custom static * initializers. */ typedef struct hal_serial_config { /** * @brief Bit rate. */ uint32_t speed; /* End of the mandatory fields.*/ /** * @brief Initialization value for the CR1 register. */ uint32_t cr1; /** * @brief Initialization value for the CR2 register. */ uint32_t cr2; /** * @brief Initialization value for the CR3 register. */ uint32_t cr3; } SerialConfig; /** * @brief @p SerialDriver specific data. */ #define _serial_driver_data \ _base_asynchronous_channel_data \ /* Driver state.*/ \ sdstate_t state; \ /* Input queue.*/ \ input_queue_t iqueue; \ /* Output queue.*/ \ output_queue_t oqueue; \ /* End of the mandatory fields.*/ \ /* Pointer to the USART registers block.*/ \ USART_TypeDef *usart; \ /* Clock frequency for the associated USART/UART.*/ \ uint32_t clock; \ /* Mask to be applied on received frames.*/ \ uint8_t rxmask; /*===========================================================================*/ /* Driver macros. */ /*===========================================================================*/ /*===========================================================================*/ /* External declarations. */ /*===========================================================================*/ #if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__) extern SerialDriver SD1; #endif #if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__) extern SerialDriver SD2; #endif #if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__) extern SerialDriver SD3; #endif #if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__) extern SerialDriver SD4; #endif #if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__) extern SerialDriver SD5; #endif #if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__) extern SerialDriver SD6; #endif #if STM32_SERIAL_USE_UART7 && !defined(__DOXYGEN__) extern SerialDriver SD7; #endif #if STM32_SERIAL_USE_UART8 && !defined(__DOXYGEN__) extern SerialDriver SD8; #endif #if STM32_SERIAL_USE_UART9 && !defined(__DOXYGEN__) extern SerialDriver SD9; #endif #if STM32_SERIAL_USE_USART10 && !defined(__DOXYGEN__) extern SerialDriver SD10; #endif #if STM32_SERIAL_USE_LPUART1 && !defined(__DOXYGEN__) extern SerialDriver LPSD1; #endif #ifdef __cplusplus extern "C" { #endif void sd_lld_init(void); void sd_lld_start(SerialDriver *sdp, const SerialConfig *config); void sd_lld_stop(SerialDriver *sdp); void sd_lld_serve_interrupt(SerialDriver *sdp); #ifdef __cplusplus } #endif #endif /* HAL_USE_SERIAL */ #endif /* HAL_SERIAL_LLD_H */ /** @} */