/*
ChibiOS - Copyright (C) 2006,2007,2008,2009,2010,2011,2012,2013,2014,
2015,2016,2017,2018,2019,2020,2021 Giovanni Di Sirio.
This file is part of ChibiOS.
ChibiOS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 3 of the License.
ChibiOS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
/**
* @file ARMv8-M-ML-TZ/chcore.h
* @brief ARMv8-M MainLine port macros and structures.
*
* @addtogroup ARMV8M_ML_TZ_CORE
* @{
*/
#ifndef CHCORE_H
#define CHCORE_H
/*===========================================================================*/
/* Module constants. */
/*===========================================================================*/
/**
* @name Architecture and Compiler
* @{
*/
/**
* @brief Macro defining a generic ARM architecture.
*/
#define PORT_ARCHITECTURE_ARM
/**
* @brief Macro defining the specific ARM architecture.
*/
#define PORT_ARCHITECTURE_ARM_V8M_MAINLINE
/**
* @brief Name of the implemented architecture.
*/
#define PORT_ARCHITECTURE_NAME "ARMv8-M Mainline"
/* The following code is not processed when the file is included from an
asm module because those intrinsic macros are not necessarily defined
by the assembler too.*/
#if !defined(_FROM_ASM_)
#if defined(__GNUC__) || defined(__DOXYGEN__)
#define PORT_COMPILER_NAME "GCC " __VERSION__
#elif defined(__ICCARM__)
#define PORT_COMPILER_NAME "IAR"
#elif defined(__CC_ARM)
#define PORT_COMPILER_NAME "RVCT"
#else
#error "unsupported compiler"
#endif
#endif /* !defined(_FROM_ASM_) */
/** @} */
/**
* @name Port Capabilities and Constants
* @{
*/
/**
* @brief This port supports a realtime counter.
*/
#define PORT_SUPPORTS_RT TRUE
/**
* @brief Natural alignment constant.
* @note It is the minimum alignment for pointer-size variables.
*/
#define PORT_NATURAL_ALIGN sizeof (void *)
/**
* @brief Stack alignment constant.
* @note It is the alignment required for the stack pointer.
*/
#define PORT_STACK_ALIGN 32U
/**
* @brief Working Areas alignment constant.
* @note It is the alignment to be enforced for thread working areas.
*/
#define PORT_WORKING_AREA_ALIGN 32U
/** @} */
/* Inclusion of the Cortex-Mx implementation specific parameters.*/
#include "cmparams.h"
/**
* @name Kernel modes
* @{
*/
/**
* @brief Standard mode.
* @details The RTOS is running in secure state with no switch in non-secure
* state ever performed. This is also used on devices with no
* TrustZone support at all.
*/
#define PORT_KERNEL_MODE_NORMAL 0U
/**
* @brief Kernel running in secure state.
* @details The RTOS is running in secure state with support for one thread
* running in non-secure state.
*/
#define PORT_KERNEL_MODE_HOST 1U
/**
* @brief Kernel running in non-secure state.
* @details The RTOS is running in non-secure state with no access to secure
* resources.
*/
#define PORT_KERNEL_MODE_GUEST 2U
/** @} */
/**
* @name Priority boundaries
* @{
*/
/**
* @brief Total priority levels.
*/
#define CORTEX_PRIORITY_LEVELS (1 << CORTEX_PRIORITY_BITS)
/**
* @brief Maximum priority level.
* @details The maximum allowed priority level is always zero.
*/
#define CORTEX_MAXIMUM_PRIORITY 0
/**
* @brief Minimum priority level.
* @details This minimum priority level is calculated from the number of
* priority bits supported by the specific Cortex-Mx implementation.
*/
#define CORTEX_MINIMUM_PRIORITY (CORTEX_PRIORITY_LEVELS - 1)
/** @} */
/*===========================================================================*/
/* Module pre-compile time settings. */
/*===========================================================================*/
/**
* @brief Kernel mode selection.
*/
#if !defined(PORT_KERNEL_MODE) || defined(__DOXYGEN__)
#define PORT_KERNEL_MODE PORT_KERNEL_MODE_NORMAL
#endif
/**
* @brief Number of MPU regions to be saved/restored during context switch.
* @note The first region is always region zero.
* @note The use of this option has an overhead of 8 bytes for each
* region for each thread.
* @note Allowed values are 0..4, zero means none.
*/
#if !defined(PORT_SWITCHED_REGIONS_NUMBER) || defined(__DOXYGEN__)
#define PORT_SWITCHED_REGIONS_NUMBER 0
#endif
/**
* @brief Stack size for the system idle thread.
* @details This size depends on the idle thread implementation, usually
* the idle thread should take no more space than those reserved
* by @p PORT_INT_REQUIRED_STACK.
* @note In this port it is set to 64 because the idle thread does have
* a stack frame when compiling without optimizations. You may
* reduce this value to zero when compiling with optimizations.
*/
#if !defined(PORT_IDLE_THREAD_STACK_SIZE) || defined(__DOXYGEN__)
#define PORT_IDLE_THREAD_STACK_SIZE 64
#endif
/**
* @brief Per-thread stack overhead for interrupts servicing.
* @details This constant is used in the calculation of the correct working
* area size.
* @note This port requires no extra stack space for interrupt handling.
*/
#if !defined(PORT_INT_REQUIRED_STACK)
#define PORT_INT_REQUIRED_STACK 0
#endif
/**
* @brief Enables the use of the WFI instruction in the idle thread loop.
*/
#if !defined(CORTEX_ENABLE_WFI_IDLE)
#define CORTEX_ENABLE_WFI_IDLE FALSE
#endif
/**
* @brief Number of upper priority levels reserved as fast interrupts.
* @note The default reserves no priority levels for fast interrupts.
*/
#if !defined(CORTEX_FAST_PRIORITIES)
#define CORTEX_FAST_PRIORITIES 0
#endif
/**
* @brief FPU support in context switch.
* @details Activating this option activates the FPU support in the kernel.
*/
#if !defined(CORTEX_USE_FPU)
#define CORTEX_USE_FPU CORTEX_HAS_FPU
#elif (CORTEX_USE_FPU == TRUE) && (CORTEX_HAS_FPU == FALSE)
/* This setting requires an FPU presence check in case it is externally
redefined.*/
#error "the selected core does not have an FPU"
#endif
/**
* @brief NVIC PRIGROUP initialization expression.
* @details The default assigns all available priority bits as preemption
* priority with no sub-priority.
* @note Changing this value is not recommended.
*/
#if !defined(CORTEX_PRIGROUP_INIT) || defined(__DOXYGEN__)
#define CORTEX_PRIGROUP_INIT (7 - CORTEX_PRIORITY_BITS)
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if (CORTEX_FAST_PRIORITIES < 0) || \
(CORTEX_FAST_PRIORITIES > (CORTEX_PRIORITY_LEVELS / 8))
#error "invalid CORTEX_FAST_PRIORITIES value specified"
#endif
#if PORT_KERNEL_MODE == PORT_KERNEL_MODE_NORMAL
/**
* @brief EXC_RETURN to be used when starting a thread.
*/
#define PORT_EXC_RETURN 0xFFFFFFFD
/**
* @brief Context save area for each thread.
*/
#define PORT_CONTEXT_RESERVED_SIZE (sizeof (struct port_intctx))
/**
* @brief Port-specific information string.
*/
#define PORT_INFO "Normal mode"
/**
* @brief SVCALL handler priority.
*/
#define CORTEX_PRIORITY_SVCALL (CORTEX_MAXIMUM_PRIORITY + \
CORTEX_FAST_PRIORITIES)
/**
* @brief PENDSV handler priority.
*/
#define CORTEX_PRIORITY_PENDSV (CORTEX_MINIMUM_PRIORITY)
/**
* @brief Maximum usable priority for normal ISRs.
* @note Must be lower than @p CORTEX_PRIORITY_SVCALL.
*/
#define CORTEX_MAX_KERNEL_PRIORITY (CORTEX_PRIORITY_SVCALL + 1)
#elif PORT_KERNEL_MODE == PORT_KERNEL_MODE_HOST
#define PORT_EXC_RETURN 0xFFFFFFFD
#if CORTEX_USE_FPU == TRUE
/* Extended secure context size with FPU.*/
#define PORT_CONTEXT_RESERVED_SIZE 0xD0
#else
/* Extended secure context size without FPU.*/
#define PORT_CONTEXT_RESERVED_SIZE 0x48
#endif
#define PORT_INFO "Secure host mode"
#define CORTEX_PRIORITY_SVCALL (CORTEX_MAXIMUM_PRIORITY + \
CORTEX_FAST_PRIORITIES)
#define CORTEX_PRIORITY_PENDSV (CORTEX_MINIMUM_PRIORITY / 2)
#define CORTEX_MAX_KERNEL_PRIORITY (CORTEX_PRIORITY_SVCALL + 1)
#elif PORT_KERNEL_MODE == PORT_KERNEL_MODE_GUEST
#define PORT_EXC_RETURN 0xFFFFFFBC
#define PORT_CONTEXT_RESERVED_SIZE (sizeof (struct port_intctx))
#define PORT_INFO "Non-secure guest mode"
#define CORTEX_PRIORITY_SVCALL (CORTEX_MAXIMUM_PRIORITY + \
CORTEX_FAST_PRIORITIES)
#define CORTEX_PRIORITY_PENDSV (CORTEX_MINIMUM_PRIORITY & 0xFFFFFFFE)
#define CORTEX_MAX_KERNEL_PRIORITY ((CORTEX_PRIORITY_SVCALL | 1) + 1)
#else
#error "invalid kernel security mode"
#endif
/**
* @brief Disabled value for BASEPRI register.
*/
#define CORTEX_BASEPRI_DISABLED CORTEX_PRIO_MASK(0)
/**
* @brief BASEPRI level within kernel lock.
*/
#define CORTEX_BASEPRI_KERNEL CORTEX_PRIO_MASK(CORTEX_MAX_KERNEL_PRIORITY)
/**
* @name Port information
* @{
*/
#if (CORTEX_MODEL == 33) || defined(__DOXYGEN__)
#if !defined(CH_CUSTOMER_LIC_PORT_CM33)
#error "CH_CUSTOMER_LIC_PORT_CM33 not defined"
#endif
#if CH_CUSTOMER_LIC_PORT_CM33 == FALSE
#error "ChibiOS Cortex-M33 port not licensed"
#endif
/**
* @brief Name of the architecture variant.
*/
#if CORTEX_USE_FPU || defined(__DOXYGEN__)
#define PORT_CORE_VARIANT_NAME "Cortex-M33 with FPU"
#else
#define PORT_CORE_VARIANT_NAME "Cortex-M33"
#endif
#elif (CORTEX_MODEL == 55) || defined(__DOXYGEN__)
#if !defined(CH_CUSTOMER_LIC_PORT_CM55)
#error "CH_CUSTOMER_LIC_PORT_CM55 not defined"
#endif
#if CH_CUSTOMER_LIC_PORT_CM55 == FALSE
#error "ChibiOS Cortex-M55 port not licensed"
#endif
/**
* @brief Name of the architecture variant.
*/
#if CORTEX_USE_FPU || defined(__DOXYGEN__)
#define PORT_CORE_VARIANT_NAME "Cortex-M55 with FPU"
#else
#define PORT_CORE_VARIANT_NAME "Cortex-M55"
#endif
#else
#error "unknown ARMv8-M core variant"
#endif
/*===========================================================================*/
/* Module data structures and types. */
/*===========================================================================*/
/* The following code is not processed when the file is included from an
asm module.*/
#if !defined(_FROM_ASM_)
/**
* @brief Interrupt saved context.
* @details This structure represents the stack frame saved during a
* preemption-capable interrupt handler.
* @note This structure is empty in this port.
*/
struct port_extctx {};
/**
* @brief System saved context.
* @details This structure represents the inner stack frame during a context
* switch.
*/
struct port_intctx {
uint32_t r0;
uint32_t r1;
uint32_t r2;
uint32_t r3;
uint32_t r12;
uint32_t lr_thd;
uint32_t pc;
uint32_t xpsr;
#if (CORTEX_USE_FPU == TRUE) || defined(__DOXYGEN__)
uint32_t s0;
uint32_t s1;
uint32_t s2;
uint32_t s3;
uint32_t s4;
uint32_t s5;
uint32_t s6;
uint32_t s7;
uint32_t s8;
uint32_t s9;
uint32_t s10;
uint32_t s11;
uint32_t s12;
uint32_t s13;
uint32_t s14;
uint32_t s15;
uint32_t fpscr;
uint32_t reserved;
#endif /* CORTEX_USE_FPU == TRUE */
};
/**
* @brief Platform dependent part of the @p thread_t structure.
* @details In this port the structure just holds a pointer to the
* @p port_intctx structure representing the stack pointer
* at context switch time.
*/
struct port_context {
#if (PORT_KERNEL_MODE == PORT_KERNEL_MODE_HOST) || defined(__DOXYGEN__)
uint32_t basepri_ns;
#endif
struct port_intctx *sp;
uint32_t basepri;
uint32_t r4;
uint32_t r5;
uint32_t r6;
uint32_t r7;
uint32_t r8;
uint32_t r9;
uint32_t r10;
uint32_t r11;
#if (CH_DBG_ENABLE_STACK_CHECK == TRUE) || defined(__DOXYGEN__)
uint32_t splim;
#endif
uint32_t lr_exc;
#if (CORTEX_USE_FPU == TRUE) || defined(__DOXYGEN__)
uint32_t s16;
uint32_t s17;
uint32_t s18;
uint32_t s19;
uint32_t s20;
uint32_t s21;
uint32_t s22;
uint32_t s23;
uint32_t s24;
uint32_t s25;
uint32_t s26;
uint32_t s27;
uint32_t s28;
uint32_t s29;
uint32_t s30;
uint32_t s31;
#endif /* CORTEX_USE_FPU == TRUE */
};
#endif /* !defined(_FROM_ASM_) */
/*===========================================================================*/
/* Module macros. */
/*===========================================================================*/
/**
* @brief Priority level to priority mask conversion macro.
*/
#define CORTEX_PRIO_MASK(n) ((n) << (8 - CORTEX_PRIORITY_BITS))
/**
* @brief Priority level verification macro.
*/
#define PORT_IRQ_IS_VALID_PRIORITY(n) \
(((n) >= 0) && ((n) < CORTEX_PRIORITY_LEVELS))
/**
* @brief Priority level verification macro.
*/
#define PORT_IRQ_IS_VALID_KERNEL_PRIORITY(n) \
(((n) >= CORTEX_MAX_KERNEL_PRIORITY) && ((n) <= CORTEX_PRIORITY_PENDSV))
/**
* @brief Optimized thread function declaration macro.
*/
#define PORT_THD_FUNCTION(tname, arg) void tname(void *arg)
/**
* @brief Initialization of stack check part of thread context.
*/
#if (CH_DBG_ENABLE_STACK_CHECK == TRUE) || defined(__DOXYGEN__)
#define PORT_SETUP_CONTEXT_SPLIM(tp, wbase) \
(tp)->ctx.splim = (uint32_t)(wbase)
#else
#define PORT_SETUP_CONTEXT_SPLIM(tp, wbase)
#endif
/**
* @brief Initialization of FPU part of thread context.
*/
#if (CORTEX_USE_FPU == TRUE) || defined(__DOXYGEN__)
#define PORT_SETUP_CONTEXT_FPU(tp) \
(tp)->ctx.sp->fpscr = (uint32_t)0
#else
#define PORT_SETUP_CONTEXT_FPU(tp)
#endif
/**
* @brief Initialization of MPU part of thread context.
*/
#if (PORT_SWITCHED_REGIONS_NUMBER == 0) || defined(__DOXYGEN__)
#define PORT_SETUP_CONTEXT_MPU(tp)
#else
#define PORT_SETUP_CONTEXT_MPU(tp)
#endif
/**
* @brief Initialization of BASEPRI_NS part of thread context.
* @note All secure threads have BASEPRI_NS set to mask PendSV, this
* way a guest RTOS cannot reschedule while a secure thread
* is running, reschedule is delayed to when the non-secure
* thread running the guest is activated again.
*/
#if (PORT_KERNEL_MODE == PORT_KERNEL_MODE_HOST) || defined(__DOXYGEN__)
#define PORT_SETUP_CONTEXT_BASEPRI_NS(tp) \
(tp)->ctx.basepri_ns = (uint32_t)CORTEX_PRIO_MASK(CORTEX_MINIMUM_PRIORITY)
#else
#define PORT_SETUP_CONTEXT_BASEPRI_NS(tp)
#endif
/**
* @brief Platform dependent part of the @p chThdCreateI() API.
* @details This code usually setup the context switching frame represented
* by an @p port_intctx structure.
*/
#define PORT_SETUP_CONTEXT(tp, wbase, wtop, pf, arg) do { \
PORT_SETUP_CONTEXT_BASEPRI_NS(tp); \
(tp)->ctx.sp = (struct port_intctx *)(void *) \
((uint8_t *)(wtop) - sizeof (struct port_intctx)); \
(tp)->ctx.basepri = CORTEX_BASEPRI_KERNEL; \
(tp)->ctx.r5 = (uint32_t)(arg); \
(tp)->ctx.r4 = (uint32_t)(pf); \
PORT_SETUP_CONTEXT_SPLIM(tp, wbase); \
(tp)->ctx.lr_exc = (uint32_t)PORT_EXC_RETURN; \
(tp)->ctx.sp->pc = (uint32_t)__port_thread_start; \
(tp)->ctx.sp->xpsr = (uint32_t)0x01000000; \
PORT_SETUP_CONTEXT_FPU(tp); \
PORT_SETUP_CONTEXT_MPU(tp); \
} while (false)
/**
* @brief Computes the thread working area global size.
* @note There is no need to perform alignments in this macro.
*/
#define PORT_WA_SIZE(n) (PORT_CONTEXT_RESERVED_SIZE + \
(size_t)(n) + \
(size_t)PORT_INT_REQUIRED_STACK)
/**
* @brief Static working area allocation.
* @details This macro is used to allocate a static thread working area
* aligned as both position and size.
*
* @param[in] s the name to be assigned to the stack array
* @param[in] n the stack size to be assigned to the thread
*/
#define PORT_WORKING_AREA(s, n) \
ALIGNED_VAR(32) stkalign_t s[THD_WORKING_AREA_SIZE(n) / sizeof (stkalign_t)]
/**
* @brief IRQ prologue code.
* @details This macro must be inserted at the start of all IRQ handlers
* enabled to invoke system APIs.
*/
#define PORT_IRQ_PROLOGUE()
/**
* @brief IRQ epilogue code.
* @details This macro must be inserted at the end of all IRQ handlers
* enabled to invoke system APIs.
*/
#define PORT_IRQ_EPILOGUE() do { \
port_lock_from_isr(); \
if (chSchIsPreemptionRequired()) { \
SCB->ICSR = SCB_ICSR_PENDSVSET_Msk; \
} \
port_unlock_from_isr(); \
} while (false)
/**
* @brief IRQ handler function declaration.
* @note @p id can be a function name or a vector number depending on the
* port implementation.
*/
#ifdef __cplusplus
#define PORT_IRQ_HANDLER(id) extern "C" void id(void)
#else
#define PORT_IRQ_HANDLER(id) void id(void)
#endif
/**
* @brief Fast IRQ handler function declaration.
* @note @p id can be a function name or a vector number depending on the
* port implementation.
*/
#ifdef __cplusplus
#define PORT_FAST_IRQ_HANDLER(id) extern "C" void id(void)
#else
#define PORT_FAST_IRQ_HANDLER(id) void id(void)
#endif
/**
* @brief Performs a context switch between two threads.
* @details This is the most critical code in any port, this function
* is responsible for the context switch between 2 threads.
* @note The implementation of this code affects directly the context
* switch performance so optimize here as much as you can.
*
* @param[in] ntp the thread to be switched in
* @param[in] otp the thread to be switched out
*/
#define port_switch(ntp, otp) do { \
__dbg_check_lock(); \
register thread_t *_ntp asm ("r0") = (ntp); \
register thread_t *_otp asm ("r1") = (otp); \
asm volatile ("svc #0" : : "r" (_otp), "r" (_ntp) : "memory"); \
__dbg_check_unlock(); \
} while (false)
/**
* @brief Returns a word representing a critical section status.
*
* @return The critical section status.
*/
#define port_get_lock_status() __port_get_irq_status()
/**
* @brief Determines if in a critical section.
*
* @param[in] sts status word returned by @p port_get_lock_status()
* @return The current status.
* @retval false if running outside a critical section.
* @retval true if running within a critical section.
*/
#define port_is_locked(sts) !__port_irq_enabled(sts)
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void port_init(os_instance_t *oip);
void __port_thread_start(void);
#if PORT_KERNEL_MODE == PORT_KERNEL_MODE_HOST
void __port_ns_boot(void *vtor);
#endif
#ifdef __cplusplus
}
#endif
/*===========================================================================*/
/* Module inline functions. */
/*===========================================================================*/
/**
* @brief Returns a word encoding the current interrupts status.
*
* @return The interrupts status.
*/
__STATIC_FORCEINLINE syssts_t __port_get_irq_status(void) {
syssts_t sts;
sts = (syssts_t)__get_BASEPRI();
return sts;
}
/**
* @brief Checks the interrupt status.
*
* @param[in] sts the interrupt status word
*
* @return The interrupt status.
* @retval false the word specified a disabled interrupts status.
* @retval true the word specified an enabled interrupts status.
*/
__STATIC_FORCEINLINE bool __port_irq_enabled(syssts_t sts) {
return sts == (syssts_t)CORTEX_BASEPRI_DISABLED;
}
/**
* @brief Determines the current execution context.
*
* @return The execution context.
* @retval false not running in ISR mode.
* @retval true running in ISR mode.
*/
__STATIC_FORCEINLINE bool port_is_isr_context(void) {
return (bool)((__get_IPSR() & 0x1FFU) != 0U);
}
/**
* @brief Kernel-lock action.
* @details In this port this function raises the base priority to kernel
* level.
*/
__STATIC_FORCEINLINE void port_lock(void) {
__set_BASEPRI(CORTEX_BASEPRI_KERNEL);
}
/**
* @brief Kernel-unlock action.
* @details In this port this function lowers the base priority to user
* level.
*/
__STATIC_FORCEINLINE void port_unlock(void) {
__set_BASEPRI(CORTEX_BASEPRI_DISABLED);
}
/**
* @brief Kernel-lock action from an interrupt handler.
* @details In this port this function raises the base priority to kernel
* level.
* @note Same as @p port_lock() in this port.
*/
__STATIC_FORCEINLINE void port_lock_from_isr(void) {
port_lock();
}
/**
* @brief Kernel-unlock action from an interrupt handler.
* @details In this port this function lowers the base priority to user
* level.
* @note Same as @p port_unlock() in this port.
*/
__STATIC_FORCEINLINE void port_unlock_from_isr(void) {
port_unlock();
}
/**
* @brief Disables all the interrupt sources.
* @note In this port it disables all the interrupt sources by raising
* the priority mask to level 0.
*/
__STATIC_FORCEINLINE void port_disable(void) {
__disable_irq();
}
/**
* @brief Disables the interrupt sources below kernel-level priority.
* @note Interrupt sources above kernel level remains enabled.
* @note In this port it raises/lowers the base priority to kernel level.
*/
__STATIC_FORCEINLINE void port_suspend(void) {
__set_BASEPRI(CORTEX_BASEPRI_KERNEL);
__enable_irq();
}
/**
* @brief Enables all the interrupt sources.
* @note In this port it lowers the base priority to user level.
*/
__STATIC_FORCEINLINE void port_enable(void) {
__set_BASEPRI(CORTEX_BASEPRI_DISABLED);
__enable_irq();
}
/**
* @brief Enters an architecture-dependent IRQ-waiting mode.
* @details The function is meant to return when an interrupt becomes pending.
* The simplest implementation is an empty function or macro but this
* would not take advantage of architecture-specific power saving
* modes.
* @note Implemented as an inlined @p WFI instruction.
*/
__STATIC_FORCEINLINE void port_wait_for_interrupt(void) {
#if CORTEX_ENABLE_WFI_IDLE == TRUE
__WFI();
#endif
}
/**
* @brief Returns the current value of the realtime counter.
*
* @return The realtime counter value.
*/
__STATIC_FORCEINLINE rtcnt_t port_rt_get_counter_value(void) {
return DWT->CYCCNT;
}
#endif /* !defined(_FROM_ASM_) */
/*===========================================================================*/
/* Module late inclusions. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#if CH_CFG_ST_TIMEDELTA > 0
#include "chcore_timer.h"
#endif /* CH_CFG_ST_TIMEDELTA > 0 */
#endif /* !defined(_FROM_ASM_) */
#endif /* CHCORE_H */
/** @} */