/* ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio ChibiOS - Copyright (C) 2023..2025 HorrorTroll ChibiOS - Copyright (C) 2023..2025 Zhaqian Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ #ifndef MCUCONF_H #define MCUCONF_H /* * AT32F405 drivers configuration. * The following settings override the default settings present in * the various device driver implementation headers. * Note that the settings for each driver only have effect if the whole * driver is enabled in halconf.h. * * IRQ priorities: * 15...0 Lowest...Highest. * * DMA priorities: * 0...3 Lowest...Highest. */ #define AT32F405_MCUCONF /* * General settings. */ #define AT32_NO_INIT FALSE /* * HAL driver system settings. */ #define AT32_HICK_ENABLED TRUE #define AT32_LICK_ENABLED FALSE #define AT32_HEXT_ENABLED TRUE #define AT32_LEXT_ENABLED FALSE #define AT32_PLLU_ENABLED TRUE #define AT32_SCLKSEL AT32_SCLKSEL_PLL #define AT32_PLLRCS AT32_PLLRCS_HEXT #define AT32_PLL_MS_VALUE 1 #define AT32_PLL_NS_VALUE 72 #define AT32_PLL_FP_VALUE 4 #define AT32_PLL_FU_VALUE 18 #define AT32_AHBDIV AT32_AHBDIV_DIV1 #define AT32_APB1DIV AT32_APB1DIV_DIV2 #define AT32_APB2DIV AT32_APB2DIV_DIV1 #define AT32_HICK_TO_SCLK AT32_HICK_TO_SCLK_48M #define AT32_HICKDIV AT32_HICKDIV_DIV1 #define AT32_HICK_TO_SCLK_DIV AT32_HICK_TO_SCLK_DIV_DIV1 #define AT32_HEXT_TO_SCLK_DIV AT32_HEXT_TO_SCLK_DIV_DIV1 #define AT32_USB_CLOCK48_REQUIRED TRUE #define AT32_PLLU_USB48_SEL AT32_PLLU_USB48_SEL_PLLU #define AT32_CLKOUT_SEL AT32_CLKOUT_SEL_HICK #define AT32_CLKOUTDIV1 AT32_CLKOUTDIV1_DIV1 #define AT32_CLKOUTDIV2 AT32_CLKOUTDIV2_DIV1 #define AT32_ERTCSEL AT32_ERTCSEL_NOCLOCK #define AT32_ERTCDIV_VALUE 12 #define AT32_I2SF5CLKSEL AT32_I2SF5CLKSEL_SCLK #define AT32_PVM_ENABLE FALSE #define AT32_PVMSEL AT32_PVMSEL_LEV1 #define AT32_LDOOVSEL AT32_LDOOVSEL_LEV3 /* * IRQ system settings. */ #define AT32_IRQ_EXINT0_PRIORITY 6 #define AT32_IRQ_EXINT1_PRIORITY 6 #define AT32_IRQ_EXINT2_PRIORITY 6 #define AT32_IRQ_EXINT3_PRIORITY 6 #define AT32_IRQ_EXINT4_PRIORITY 6 #define AT32_IRQ_EXINT5_9_PRIORITY 6 #define AT32_IRQ_EXINT10_15_PRIORITY 6 #define AT32_IRQ_EXINT16_PRIORITY 6 #define AT32_IRQ_EXINT17_PRIORITY 15 #define AT32_IRQ_EXINT18_PRIORITY 6 #define AT32_IRQ_EXINT20_PRIORITY 6 #define AT32_IRQ_EXINT21_PRIORITY 15 #define AT32_IRQ_EXINT22_PRIORITY 15 #define AT32_IRQ_TMR1_BRK_TMR9_PRIORITY 7 #define AT32_IRQ_TMR1_OVF_TMR10_PRIORITY 7 #define AT32_IRQ_TMR1_HALL_TMR11_PRIORITY 7 #define AT32_IRQ_TMR1_CH_PRIORITY 7 #define AT32_IRQ_TMR2_PRIORITY 7 #define AT32_IRQ_TMR3_PRIORITY 7 #define AT32_IRQ_TMR4_PRIORITY 7 #define AT32_IRQ_TMR6_PRIORITY 7 #define AT32_IRQ_TMR7_PRIORITY 7 #define AT32_IRQ_TMR13_PRIORITY 7 #define AT32_IRQ_TMR14_PRIORITY 7 #define AT32_IRQ_USART1_PRIORITY 12 #define AT32_IRQ_USART2_PRIORITY 12 #define AT32_IRQ_USART3_PRIORITY 12 #define AT32_IRQ_UART4_PRIORITY 12 #define AT32_IRQ_UART5_PRIORITY 12 #define AT32_IRQ_USART6_PRIORITY 12 #define AT32_IRQ_UART7_PRIORITY 12 #define AT32_IRQ_UART8_PRIORITY 12 /* * ADC driver system settings. */ #define AT32_ADC_USE_ADC1 FALSE #define AT32_ADC_ADC1_DMA_PRIORITY 2 #define AT32_ADC_IRQ_PRIORITY 6 #define AT32_ADC_ADC1_DMA_IRQ_PRIORITY 6 #define AT32_ADC_ADCDIV 8 /* * CAN driver system settings. */ #define AT32_CAN_USE_CAN1 FALSE #define AT32_CAN_CAN1_IRQ_PRIORITY 11 /* * GPT driver system settings. */ #define AT32_GPT_USE_TMR1 FALSE #define AT32_GPT_USE_TMR2 FALSE #define AT32_GPT_USE_TMR3 FALSE #define AT32_GPT_USE_TMR4 FALSE #define AT32_GPT_USE_TMR6 FALSE #define AT32_GPT_USE_TMR7 FALSE #define AT32_GPT_USE_TMR9 FALSE #define AT32_GPT_USE_TMR10 FALSE #define AT32_GPT_USE_TMR11 FALSE #define AT32_GPT_USE_TMR13 FALSE #define AT32_GPT_USE_TMR14 FALSE /* * I2C driver system settings. */ #define AT32_I2C_USE_I2C1 FALSE #define AT32_I2C_USE_I2C2 FALSE #define AT32_I2C_USE_I2C3 FALSE #define AT32_I2C_BUSY_TIMEOUT 50 #define AT32_I2C_I2C1_DMA_PRIORITY 3 #define AT32_I2C_I2C2_DMA_PRIORITY 3 #define AT32_I2C_I2C3_DMA_PRIORITY 3 #define AT32_I2C_I2C1_IRQ_PRIORITY 5 #define AT32_I2C_I2C2_IRQ_PRIORITY 5 #define AT32_I2C_I2C3_IRQ_PRIORITY 5 #define AT32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") /* * ICU driver system settings. */ #define AT32_ICU_USE_TMR1 FALSE #define AT32_ICU_USE_TMR2 FALSE #define AT32_ICU_USE_TMR3 FALSE #define AT32_ICU_USE_TMR4 FALSE #define AT32_ICU_USE_TMR9 FALSE /* * PWM driver system settings. */ #define AT32_PWM_USE_TMR1 FALSE #define AT32_PWM_USE_TMR2 FALSE #define AT32_PWM_USE_TMR3 FALSE #define AT32_PWM_USE_TMR4 FALSE #define AT32_PWM_USE_TMR9 FALSE #define AT32_PWM_USE_TMR10 FALSE #define AT32_PWM_USE_TMR11 FALSE #define AT32_PWM_USE_TMR13 FALSE #define AT32_PWM_USE_TMR14 FALSE /* * RTC driver system settings. */ #define AT32_ERTC_DIVA_VALUE 32 #define AT32_ERTC_DIVB_VALUE 1024 #define AT32_ERTC_CTRL_INIT 0 #define AT32_ERTC_TAMP_INIT 0 /* * SERIAL driver system settings. */ #define AT32_SERIAL_USE_USART1 FALSE #define AT32_SERIAL_USE_USART2 FALSE #define AT32_SERIAL_USE_USART3 FALSE #define AT32_SERIAL_USE_UART4 FALSE #define AT32_SERIAL_USE_UART5 FALSE #define AT32_SERIAL_USE_USART6 FALSE #define AT32_SERIAL_USE_UART7 FALSE #define AT32_SERIAL_USE_UART8 FALSE /* * SIO driver system settings. */ #define AT32_SIO_USE_USART1 FALSE #define AT32_SIO_USE_USART2 FALSE #define AT32_SIO_USE_USART3 FALSE #define AT32_SIO_USE_UART4 FALSE #define AT32_SIO_USE_UART5 FALSE #define AT32_SIO_USE_USART6 FALSE #define AT32_SIO_USE_UART7 FALSE #define AT32_SIO_USE_UART8 FALSE /* * SPI driver system settings. */ #define AT32_SPI_USE_SPI1 FALSE #define AT32_SPI_USE_SPI2 FALSE #define AT32_SPI_USE_SPI3 FALSE #define AT32_SPI_SPI1_DMA_PRIORITY 1 #define AT32_SPI_SPI2_DMA_PRIORITY 1 #define AT32_SPI_SPI3_DMA_PRIORITY 1 #define AT32_SPI_SPI1_IRQ_PRIORITY 10 #define AT32_SPI_SPI2_IRQ_PRIORITY 10 #define AT32_SPI_SPI3_IRQ_PRIORITY 10 #define AT32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") /* * ST driver system settings. */ #define AT32_ST_IRQ_PRIORITY 8 #define AT32_ST_USE_TIMER 2 /* * UART driver system settings. */ #define AT32_UART_USE_USART1 FALSE #define AT32_UART_USE_USART2 FALSE #define AT32_UART_USE_USART3 FALSE #define AT32_UART_USE_UART4 FALSE #define AT32_UART_USE_UART5 FALSE #define AT32_UART_USE_USART6 FALSE #define AT32_UART_USE_UART7 FALSE #define AT32_UART_USE_UART8 FALSE #define AT32_UART_USART1_DMA_PRIORITY 0 #define AT32_UART_USART2_DMA_PRIORITY 0 #define AT32_UART_USART3_DMA_PRIORITY 0 #define AT32_UART_UART4_DMA_PRIORITY 0 #define AT32_UART_UART5_DMA_PRIORITY 0 #define AT32_UART_USART6_DMA_PRIORITY 0 #define AT32_UART_UART7_DMA_PRIORITY 0 #define AT32_UART_UART8_DMA_PRIORITY 0 #define AT32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") /* * USB driver system settings. */ #define AT32_USB_USE_OTG1 TRUE #define AT32_USB_USE_OTG2 FALSE #define AT32_USB_OTG1_IRQ_PRIORITY 14 #define AT32_USB_OTG2_IRQ_PRIORITY 14 #define AT32_USB_OTG1_RX_FIFO_SIZE 512 #define AT32_USB_OTG2_RX_FIFO_SIZE 1024 /* * WDG driver system settings. */ #define AT32_WDG_USE_WDT FALSE #include "config.h" #endif /* MCUCONF_H */