/*
    ChibiOS - Copyright (C) 2014-2015 Fabio Utzig

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    SPIv1/hal_spi_lld.h
 * @brief   KINETIS SPI subsystem low level driver header.
 *
 * @addtogroup SPI
 * @{
 */

#ifndef HAL_SPI_LLD_H_
#define HAL_SPI_LLD_H_

#if HAL_USE_SPI || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/**
 * @name    Configuration options
 * @{
 */
/**
 * @brief   SPI0 driver enable switch.
 * @details If set to @p TRUE the support for SPI0 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(KINETIS_SPI_USE_SPI0) || defined(__DOXYGEN__)
#define KINETIS_SPI_USE_SPI0                  FALSE
#endif

/**
 * @brief   SPI0 interrupt priority level setting.
 */
#if !defined(KINETIS_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define KINETIS_SPI_SPI0_IRQ_PRIORITY         10
#endif

/**
 * @brief   SPI1 driver enable switch.
 * @details If set to @p TRUE the support for SPI0 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(KINETIS_SPI_USE_SPI1) || defined(__DOXYGEN__)
#define KINETIS_SPI_USE_SPI1                  FALSE
#endif

/**
 * @brief   SPI1 interrupt priority level setting.
 */
#if !defined(KINETIS_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define KINETIS_SPI_SPI1_IRQ_PRIORITY         10
#endif

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

#if KINETIS_SPI_USE_SPI0 && !KINETIS_HAS_SPI0
#error "SPI0 not present in the selected device"
#endif

#if KINETIS_SPI_USE_SPI1 && !KINETIS_HAS_SPI1
#error "SPI1 not present in the selected device"
#endif

#if KINETIS_SPI_USE_SPI0 && KINETIS_SPI_USE_SPI1
#error "Only one SPI peripheral can be enabled"
#endif

#if !(KINETIS_SPI_USE_SPI0 || KINETIS_SPI_USE_SPI1)
#error "SPI driver activated but no SPI peripheral assigned"
#endif

#if KINETIS_SPI_USE_SPI0 &&                                                 \
    !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_SPI_SPI0_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI0"
#endif

#if KINETIS_SPI_USE_SPI1 &&                                                 \
    !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_SPI_SPI1_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI1"
#endif

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/**
 * @brief   SPI notification callback type.
 *
 * @param[in] spip      pointer to the @p SPIDriver object triggering the
 *                      callback
 */
typedef void (*spicallback_t)(SPIDriver *spip);

/**
 * @brief   Low level fields of the SPI configuration structure.
 */
#define spi_lld_config_fields                                               \
  /* @brief SPI initialization data. */                                     \
  uint32_t                  tar0;

#define spi_lld_driver_fields                                               \
  /* @brief Pointer to the SPIx registers block. */                         \
  SPI_TypeDef               *spi;                                           \
  /* @brief   Number of bytes/words of data to transfer. */                 \
  size_t                    count;                                          \
  /* @brief   Word size in bytes. */                                        \
  size_t                    word_size;                                      \
  /* @brief   Pointer to the buffer with data to send. */                   \
  const uint8_t             *txbuf;                                         \
  /* @brief   Pointer to the buffer to put received data. */                \
  uint8_t                   *rxbuf;

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/* TAR settings for n bits at SYSCLK / 2 */
#define KINETIS_SPI_TAR_SYSCLK_DIV_2(n)\
    SPIx_CTARn_FMSZ((n) - 1) | \
    SPIx_CTARn_CPOL | \
    SPIx_CTARn_CPHA | \
    SPIx_CTARn_DBR | \
    SPIx_CTARn_PBR(0) | \
    SPIx_CTARn_BR(0) | \
    SPIx_CTARn_CSSCK(0) | \
    SPIx_CTARn_ASC(0) | \
    SPIx_CTARn_DT(0)

/* TAR settings for n bits at SYSCLK / 4096 for debugging */
#define KINETIS_SPI_TAR_SYSCLK_DIV_4096(n) \
    SPIx_CTARn_FMSZ(((n) - 1)) | \
    SPIx_CTARn_CPOL | \
    SPIx_CTARn_CPHA | \
    SPIx_CTARn_PBR(0) | \
    SPIx_CTARn_BR(0xB) | \
    SPIx_CTARn_CSSCK(0xB) | \
    SPIx_CTARn_ASC(0x7) | \
    SPIx_CTARn_DT(0xB)

#define KINETIS_SPI_TAR_8BIT_FAST   KINETIS_SPI_TAR_SYSCLK_DIV_2(8)
#define KINETIS_SPI_TAR_8BIT_SLOW   KINETIS_SPI_TAR_SYSCLK_DIV_4096(8)

#define KINETIS_SPI_TAR0_DEFAULT    KINETIS_SPI_TAR_SYSCLK_DIV_2(8)
#define KINETIS_SPI_TAR1_DEFAULT    KINETIS_SPI_TAR_SYSCLK_DIV_2(8)

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#if KINETIS_SPI_USE_SPI0 && !defined(__DOXYGEN__)
extern SPIDriver SPID1;
#endif

#if KINETIS_SPI_USE_SPI1 && !defined(__DOXYGEN__)
extern SPIDriver SPID2;
#endif

#ifdef __cplusplus
extern "C" {
#endif
  void spi_lld_init(void);
  void spi_lld_start(SPIDriver *spip);
  void spi_lld_stop(SPIDriver *spip);
  void spi_lld_select(SPIDriver *spip);
  void spi_lld_unselect(SPIDriver *spip);
  void spi_lld_ignore(SPIDriver *spip, size_t n);
  void spi_lld_exchange(SPIDriver *spip, size_t n,
                        const void *txbuf, void *rxbuf);
  void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
  void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
  uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
#ifdef __cplusplus
}
#endif

#endif /* HAL_USE_SPI */

#endif /* HAL_SPI_LLD_H_ */

/** @} */