/*
 * Copyright 2013-2016, NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _FSL_IOPCTL_H_
#define _FSL_IOPCTL_H_

#include "fsl_common.h"

/*!
 * @addtogroup iopctl_driver
 * @{
 */

/*! @file */

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.lpc_iopctl"
#endif

/*! @name Driver version */
/*@{*/
/*! @brief IOPCTL driver version 2.0.0. */
#define LPC_IOPCTL_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/

/**
 * @brief Array of IOPCTL pin definitions passed to IOPCTL_SetPinMuxing() must be in this format
 */
typedef struct _iopctl_group
{
    uint32_t port : 8;      /* Pin port */
    uint32_t pin : 32;      /* Pin number */
    uint32_t modefunc : 12; /* Function and mode */
} iopctl_group_t;

/**
 * @brief IOPCTL function and mode selection definitions
 * @note See the User Manual for specific modes and functions supported by the various pins.
 */
#define IOPCTL_FUNC0        0x0         /*!< Selects pin function 0 */
#define IOPCTL_FUNC1        0x1         /*!< Selects pin function 1 */
#define IOPCTL_FUNC2        0x2         /*!< Selects pin function 2 */
#define IOPCTL_FUNC3        0x3         /*!< Selects pin function 3 */
#define IOPCTL_FUNC4        0x4         /*!< Selects pin function 4 */
#define IOPCTL_FUNC5        0x5         /*!< Selects pin function 5 */
#define IOPCTL_FUNC6        0x6         /*!< Selects pin function 6 */
#define IOPCTL_FUNC7        0x7         /*!< Selects pin function 7 */
#define IOPCTL_FUNC8        0x8         /*!< Selects pin function 8 */
#define IOPCTL_FUNC9        0x9         /*!< Selects pin function 9 */
#define IOPCTL_FUNC10       0xA         /*!< Selects pin function 10 */
#define IOPCTL_FUNC11       0xB         /*!< Selects pin function 11 */
#define IOPCTL_FUNC12       0xC         /*!< Selects pin function 12 */
#define IOPCTL_FUNC13       0xD         /*!< Selects pin function 13 */
#define IOPCTL_FUNC14       0xE         /*!< Selects pin function 14 */
#define IOPCTL_FUNC15       0xF         /*!< Selects pin function 15 */
#define IOPCTL_PUPD_EN      (0x1 << 4)  /*!< Enables Pullup / Pulldown */
#define IOPCTL_PULLDOWN_EN  (0x0 << 5)  /*!< Selects pull-down function */
#define IOPCTL_PULLUP_EN    (0x1 << 5)  /*!< Selects pull-up function */
#define IOPCTL_INBUF_EN     (0x1 << 6)  /*!< Enables buffer function  on input */
#define IOPCTL_SLEW_RATE    (0x0 << 7)  /*!< Slew Rate Control */
#define IOPCTL_FULLDRIVE_EN (0x1 << 8)  /*!< Selects full drive */
#define IOPCTL_ANAMUX_EN    (0x1 << 9)  /*!< Enables analog mux function by setting 0 to bit 7 */
#define IOPCTL_PSEDRAIN_EN  (0x1 << 10) /*!< Enables pseudo output drain function */
#define IOPCTL_INV_EN       (0x1 << 11) /*!< Enables invert function on input */

#if defined(__cplusplus)
extern "C" {
#endif

/**
 * @brief   Sets I/O Pad Control pin mux
 * @param   base        : The base of IOPCTL peripheral on the chip
 * @param   port        : Port to mux
 * @param   pin         : Pin to mux
 * @param   modefunc    : OR'ed values of type IOPCTL_*
 * @return  Nothing
 */
__STATIC_INLINE void IOPCTL_PinMuxSet(IOPCTL_Type *base, uint8_t port, uint8_t pin, uint32_t modefunc)
{
    base->PIO[port][pin] = modefunc;
}

/**
 * @brief   Set all I/O Control pin muxing
 * @param   base        : The base of IOPCTL peripheral on the chip
 * @param   pinArray    : Pointer to array of pin mux selections
 * @param   arrayLength : Number of entries in pinArray
 * @return  Nothing
 */
__STATIC_INLINE void IOPCTL_SetPinMuxing(IOPCTL_Type *base, const iopctl_group_t *pinArray, uint32_t arrayLength)
{
    uint32_t i;

    for (i = 0; i < arrayLength; i++)
    {
        IOPCTL_PinMuxSet(base, pinArray[i].port, pinArray[i].pin, pinArray[i].modefunc);
    }
}

/* @} */

#if defined(__cplusplus)
}
#endif

#endif /* _FSL_IOPCTL_H_ */