/*
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2017 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _BOARD_H_
#define _BOARD_H_

#include "clock_config.h"
#include "fsl_gpio.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "TWR-KV31F120M"

/*! @brief The UART to use for debug messages. */
#define BOARD_USE_UART
#define BOARD_DEBUG_UART_TYPE DEBUG_CONSOLE_DEVICE_TYPE_UART
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) UART0
#define BOARD_DEBUG_UART_INSTANCE 0U
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_CoreSysClk
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetCoreSysClkFreq()
#define BOARD_UART_IRQ UART0_RX_TX_IRQn
#define BOARD_UART_IRQ_HANDLER UART0_RX_TX_IRQHandler

#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200
#endif /* BOARD_DEBUG_UART_BAUDRATE */

/*! @brief The i2c instance used for i2c connection by default */
#define BOARD_I2C_BASEADDR I2C0

/*! @brief The Flextimer instance/channel used for board */
#define BOARD_FTM_BASEADDR FTM0

/*! @brief The CMP instance/channel used for board. */
#define BOARD_CMP_BASEADDR CMP0
#define BOARD_CMP_CHANNEL 0U

/*! @brief If connected the TWR_MEM, this is spi sd card */
#define SDCARD_CARD_WRITE_PROTECTION_GPIO GPIOB
#define SDCARD_CARD_WRITE_PROTECTION_GPIO_PORT PORTB
#define SDCARD_CARD_WRITE_PROTECTION_GPIO_PIN 22U
#define SDCARD_SPI_HW_BASEADDR SPI1
#define SDCARD_CD_GPIO_IRQ_HANDLER PORTC_IRQHandler

/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U
#ifndef BOARD_LED_RED_GPIO
#define BOARD_LED_RED_GPIO GPIOE
#endif
#define BOARD_LED_RED_GPIO_PORT PORTE
#ifndef BOARD_LED_RED_GPIO_PIN
#define BOARD_LED_RED_GPIO_PIN 0U
#endif
#ifndef BOARD_LED_YELLOW_GPIO
#define BOARD_LED_YELLOW_GPIO GPIOE
#endif
#define BOARD_LED_YELLOW_GPIO_PORT PORTE
#ifndef BOARD_LED_YELLOW_GPIO_PIN
#define BOARD_LED_YELLOW_GPIO_PIN 1U
#endif
#ifndef BOARD_LED_ORANGE_GPIO
#define BOARD_LED_ORANGE_GPIO GPIOB
#endif
#define BOARD_LED_ORANGE_GPIO_PORT PORTB
#ifndef BOARD_LED_ORANGE_GPIO_PIN
#define BOARD_LED_ORANGE_GPIO_PIN 19U
#endif
#ifndef BOARD_LED_GREEN_GPIO
#define BOARD_LED_GREEN_GPIO GPIOD
#endif
#define BOARD_LED_GREEN_GPIO_PORT PORTD
#ifndef BOARD_LED_GREEN_GPIO_PIN
#define BOARD_LED_GREEN_GPIO_PIN 7U
#endif

#define LED_RED_INIT(output)                                                 \
    GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, output); \
    BOARD_LED_RED_GPIO->PDDR |= (1U << BOARD_LED_RED_GPIO_PIN) /*!< Enable target LED_RED */
#define LED_RED_ON() \
    GPIO_PortClear(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED_RED */
#define LED_RED_OFF() \
    GPIO_PortSet(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED_RED */
#define LED_RED_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */

#define LED_YELLOW_INIT(output)                                                    \
    GPIO_PinWrite(BOARD_LED_YELLOW_GPIO, BOARD_LED_YELLOW_GPIO_PIN, output); \
    BOARD_LED_YELLOW_GPIO->PDDR |= (1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Enable target LED_YELLOW */
#define LED_YELLOW_ON() \
    GPIO_PortClear(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Turn on target LED_YELLOW */
#define LED_YELLOW_OFF() \
    GPIO_PortSet(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Turn off target LED_YELLOW */
#define LED_YELLOW_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Toggle on target LED_YELLOW */

#define LED_ORANGE_INIT(output)                                                    \
    GPIO_PinWrite(BOARD_LED_ORANGE_GPIO, BOARD_LED_ORANGE_GPIO_PIN, output); \
    BOARD_LED_ORANGE_GPIO->PDDR |= (1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Enable target LED_ORANGE */
#define LED_ORANGE_ON() \
    GPIO_PortClear(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn on target LED_ORANGE */
#define LED_ORANGE_OFF() \
    GPIO_PortSet(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn off target LED_ORANGE */
#define LED_ORANGE_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Toggle on target LED_ORANGE */

#define LED_GREEN_INIT(output)                                                   \
    GPIO_PinWrite(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output); \
    BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN */
#define LED_GREEN_ON() \
    GPIO_PortClear(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */
#define LED_GREEN_OFF() \
    GPIO_PortSet(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */
#define LED_GREEN_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */

/* @brief The SDSPI disk PHY configuration. */
#define BOARD_SDSPI_SPI_BASE SPI1_BASE /*!< SPI base address for SDSPI */
#define BOARD_SDSPI_CD_GPIO_BASE GPIOE /*!< Port related to card detect pin for SDSPI */
#ifndef BOARD_SDSPI_CD_PIN
#define BOARD_SDSPI_CD_PIN 9U /*!< Card detect pin for SDSPI */
#endif

#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */

/*******************************************************************************
 * API
 ******************************************************************************/

void BOARD_InitDebugConsole(void);

#if defined(__cplusplus)
}
#endif /* __cplusplus */

#endif /* _BOARD_H_ */