/*
 * Copyright 2019 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _BOARD_H_
#define _BOARD_H_

#include "clock_config.h"
#include "fsl_gpio.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "TWR-KM35Z75M"

/*! @brief The UART to use for debug messages. */
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) UART2
#define BOARD_DEBUG_UART_INSTANCE 2U
#define BOARD_DEBUG_UART_CLKSRC BUS_CLK
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetBusClkFreq()
#define BOARD_UART_IRQ UART0_UART1_UART2_UART3_IRQn
#define BOARD_UART_IRQ_HANDLER UART0_UART1_UART2_UART3_IRQHandler

#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200
#endif /* BOARD_DEBUG_UART_BAUDRATE */

#ifndef BOARD_LPUART_CLOCK_SOURCE
#define BOARD_LPUART_CLOCK_SOURCE kClockLpuartSrcOsc0erClk
#endif

/*! @brief The spi instance used for board. */
#define BOARD_SPI_BASEADDR SPI0

/*! @brief The i2c instance used for board. */
#define BOARD_I2C_BASEADDR I2C0

/*! @brief ADC0 input channel */
#define BOARD_ADC0_INPUT_CHANNEL 0U

/*! @brief The CMP instance/channel used for board. */
#define BOARD_CMP_BASEADDR CMP2
#define BOARD_CMP_CHANNEL 4U

/*! @brief The rtc instance used for board. */
#define BOARD_RTC_FUNC_BASEADDR RTC

/*! @brief Define the port interrupt number for the board switches */
#ifndef BOARD_SW1_GPIO
#define BOARD_SW1_GPIO GPIOA
#endif
#ifndef BOARD_SW1_PORT
#define BOARD_SW1_PORT PORTA
#endif
#ifndef BOARD_SW1_GPIO_PIN
#define BOARD_SW1_GPIO_PIN 4U
#endif
#define BOARD_SW1_IRQ PTx_IRQn
#define BOARD_SW1_IRQ_HANDLER PTx_IRQHandler
#define BOARD_SW1_NAME "SW1"

/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U
#ifndef BOARD_LED_RED_GPIO
#define BOARD_LED_RED_GPIO GPIOJ
#endif
#define BOARD_LED_RED_GPIO_PORT PORTJ
#ifndef BOARD_LED_RED_GPIO_PIN
#define BOARD_LED_RED_GPIO_PIN 4U
#endif
#ifndef BOARD_LED_GREEN_GPIO
#define BOARD_LED_GREEN_GPIO GPIOJ
#endif
#define BOARD_LED_GREEN_GPIO_PORT PORTJ
#ifndef BOARD_LED_GREEN_GPIO_PIN
#define BOARD_LED_GREEN_GPIO_PIN 3U
#endif
#ifndef BOARD_LED_ORANGE_GPIO
#define BOARD_LED_ORANGE_GPIO GPIOD
#endif
#define BOARD_LED_ORANGE_GPIO_PORT PORTD
#ifndef BOARD_LED_ORANGE_GPIO_PIN
#define BOARD_LED_ORANGE_GPIO_PIN 0U
#endif

#define LED_RED_INIT(output)                                           \
    GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, output); \
    BOARD_LED_RED_GPIO->PDDR |= (1U << BOARD_LED_RED_GPIO_PIN)                        /*!< Enable target LED_RED */
#define LED_RED_ON() GPIO_PortClear(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED_RED */
#define LED_RED_OFF() GPIO_PortSet(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN)  /*!< Turn off target LED_RED */
#define LED_RED_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */

#define LED_GREEN_INIT(output)                                             \
    GPIO_PinWrite(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output); \
    BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN */
#define LED_GREEN_ON() \
    GPIO_PortClear(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */
#define LED_GREEN_OFF() \
    GPIO_PortSet(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */
#define LED_GREEN_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */

#define LED_ORANGE_INIT(output)                                              \
    GPIO_PinWrite(BOARD_LED_ORANGE_GPIO, BOARD_LED_ORANGE_GPIO_PIN, output); \
    BOARD_LED_ORANGE_GPIO->PDDR |= (1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Enable target LED_ORANGE */
#define LED_ORANGE_ON() \
    GPIO_PortClear(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn on target LED_ORANGE */
#define LED_ORANGE_OFF() \
    GPIO_PortSet(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn off target LED_ORANGE */
#define LED_ORANGE_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Toggle on target LED_ORANGE */

#define BOARD_ACCEL_I2C_BASEADDR I2C0

#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */

/*******************************************************************************
 * API
 ******************************************************************************/

void BOARD_InitDebugConsole(void);

#if defined(__cplusplus)
}
#endif /* __cplusplus */

#endif /* _BOARD_H_ */