/*
 * Copyright (c) 2015, Freescale Semiconductor, Inc.
 * Copyright 2016-2017 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _BOARD_H_
#define _BOARD_H_

#include "clock_config.h"
#include "fsl_gpio.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/
/* The board name */
#define BOARD_NAME "TWR-K64F120M"

/* The UART to use for debug messages. */
#define BOARD_DEBUG_UART_TYPE DEBUG_CONSOLE_DEVICE_TYPE_UART
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) UART1
#define BOARD_DEBUG_UART_INSTANCE 1U
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_CoreSysClk
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetCoreSysClkFreq()
#define BOARD_UART_IRQ UART1_RX_TX_IRQn
#define BOARD_UART_IRQ_HANDLER UART1_RX_TX_IRQHandler

#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200
#endif /* BOARD_DEBUG_UART_BAUDRATE */

#define BOARD_DEMO_I2C_CLKSRC kCLOCK_BusClk
#define BOARD_DEMO_SAI_CLKSRC kCLOCK_CoreSysClk
#define BOARD_DEMO_SAI I2S0
#define BOARD_SAI_DEMO_I2C_BASEADDR I2C0
/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U
#ifndef BOARD_LED_GREEN_GPIO
#define BOARD_LED_GREEN_GPIO GPIOE
#endif
#define BOARD_LED_GREEN_GPIO_PORT PORTE
#ifndef BOARD_LED_GREEN_GPIO_PIN
#define BOARD_LED_GREEN_GPIO_PIN 6U
#endif
#ifndef BOARD_LED_YELLOW_GPIO
#define BOARD_LED_YELLOW_GPIO GPIOE
#endif
#define BOARD_LED_YELLOW_GPIO_PORT PORTE
#ifndef BOARD_LED_YELLOW_GPIO_PIN
#define BOARD_LED_YELLOW_GPIO_PIN 7U
#endif
#ifndef BOARD_LED_ORANGE_GPIO
#define BOARD_LED_ORANGE_GPIO GPIOE
#endif
#define BOARD_LED_ORANGE_GPIO_PORT PORTE
#ifndef BOARD_LED_ORANGE_GPIO_PIN
#define BOARD_LED_ORANGE_GPIO_PIN 8U
#endif
#ifndef BOARD_LED_BLUE_GPIO
#define BOARD_LED_BLUE_GPIO GPIOE
#endif
#define BOARD_LED_BLUE_GPIO_PORT PORTE
#ifndef BOARD_LED_BLUE_GPIO_PIN
#define BOARD_LED_BLUE_GPIO_PIN 9U
#endif

#define LED_GREEN_INIT(output)                                                   \
    GPIO_PinWrite(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output); \
    BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN */
#define LED_GREEN_ON() \
    GPIO_PortClear(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */
#define LED_GREEN_OFF() \
    GPIO_PortSet(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */
#define LED_GREEN_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */

#define LED_YELLOW_INIT(output)                                                    \
    GPIO_PinWrite(BOARD_LED_YELLOW_GPIO, BOARD_LED_YELLOW_GPIO_PIN, output); \
    BOARD_LED_YELLOW_GPIO->PDDR |= (1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Enable target LED_YELLOW */
#define LED_YELLOW_ON() \
    GPIO_PortClear(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Turn on target LED_YELLOW */
#define LED_YELLOW_OFF() \
    GPIO_PortSet(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Turn off target LED_YELLOW */
#define LED_YELLOW_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Toggle on target LED_YELLOW */

#define LED_ORANGE_INIT(output)                                                    \
    GPIO_PinWrite(BOARD_LED_ORANGE_GPIO, BOARD_LED_ORANGE_GPIO_PIN, output); \
    BOARD_LED_ORANGE_GPIO->PDDR |= (1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Enable target LED_ORANGE */
#define LED_ORANGE_ON() \
    GPIO_PortClear(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn on target LED_ORANGE */
#define LED_ORANGE_OFF() \
    GPIO_PortSet(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn off target LED_ORANGE */
#define LED_ORANGE_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Toggle on target LED_ORANGE */

#define LED_BLUE_INIT(output)                                                  \
    GPIO_PinWrite(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PIN, output); \
    BOARD_LED_BLUE_GPIO->PDDR |= (1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Enable target LED_BLUE */
#define LED_BLUE_ON() \
    GPIO_PortClear(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED_BLUE */
#define LED_BLUE_OFF() \
    GPIO_PortSet(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED_BLUE */
#define LED_BLUE_TOGGLE() \
    GPIO_PortToggle(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */

/* The SDHC instance/channel used for board */
#define BOARD_SDHC_BASEADDR SDHC
#define BOARD_SDHC_CLKSRC kCLOCK_CoreSysClk
#define BOARD_SDHC_CLK_FREQ CLOCK_GetFreq(kCLOCK_CoreSysClk)
#define BOARD_SDHC_IRQ SDHC_IRQn
#define BOARD_SDHC_CD_GPIO_BASE GPIOB
#ifndef BOARD_SDHC_CD_GPIO_PIN
#define BOARD_SDHC_CD_GPIO_PIN 20U
#endif
#define BOARD_SDHC_CD_PORT_BASE PORTB
#define BOARD_SDHC_CD_PORT_IRQ PORTB_IRQn
#define BOARD_SDHC_CD_PORT_IRQ_HANDLER PORTB_IRQHandler

#define BOARD_ACCEL_I2C_BASEADDR I2C1

/* @brief The SDSPI disk PHY configuration. */
#define BOARD_SDSPI_SPI_BASE SPI1_BASE /*!< SPI base address for SDSPI */
#define BOARD_SDSPI_CD_GPIO_BASE GPIOD /*!< Port related to card detect pin for SDSPI */
#ifndef BOARD_SDSPI_CD_PIN
#define BOARD_SDSPI_CD_PIN 12U /*!< Card detect pin for SDSPI */
#endif

#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */

/*******************************************************************************
 * API
 ******************************************************************************/

void BOARD_InitDebugConsole(void);

#if defined(__cplusplus)
}
#endif /* __cplusplus */

#endif /* _BOARD_H_ */