/* * Copyright 2017-2018 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _BOARD_H_ #define _BOARD_H_ #include "clock_config.h" #include "fsl_common.h" #include "fsl_reset.h" #include "fsl_gpio.h" #include "fsl_iocon.h" /******************************************************************************* * Definitions ******************************************************************************/ /*! @brief The board name */ #define BOARD_NAME "LPCXpresso55S69" /*! @brief The UART to use for debug messages. */ /* TODO: rename UART to USART */ #define BOARD_DEBUG_UART_TYPE kSerialPort_Uart #define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0 #define BOARD_DEBUG_UART_INSTANCE 0U #define BOARD_DEBUG_UART_CLK_FREQ 12000000U #define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0 #define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn #define BOARD_DEBUG_UART_CLKSRC kCLOCK_Flexcomm0 #define BOARD_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler #define BOARD_UART_IRQ FLEXCOMM0_IRQn #define BOARD_ACCEL_I2C_BASEADDR I2C4 #define BOARD_ACCEL_I2C_CLOCK_FREQ 12000000 #define BOARD_DEBUG_UART_TYPE_CORE1 kSerialPort_Uart #define BOARD_DEBUG_UART_BASEADDR_CORE1 (uint32_t) USART1 #define BOARD_DEBUG_UART_INSTANCE_CORE1 1U #define BOARD_DEBUG_UART_CLK_FREQ_CORE1 12000000U #define BOARD_DEBUG_UART_CLK_ATTACH_CORE1 kFRO12M_to_FLEXCOMM1 #define BOARD_DEBUG_UART_RST_CORE1 kFC1_RST_SHIFT_RSTn #define BOARD_DEBUG_UART_CLKSRC_CORE1 kCLOCK_Flexcomm1 #define BOARD_UART_IRQ_HANDLER_CORE1 FLEXCOMM1_IRQHandler #define BOARD_UART_IRQ_CORE1 FLEXCOMM1_IRQn #ifndef BOARD_DEBUG_UART_BAUDRATE #define BOARD_DEBUG_UART_BAUDRATE 115200U #endif /* BOARD_DEBUG_UART_BAUDRATE */ #ifndef BOARD_DEBUG_UART_BAUDRATE_CORE1 #define BOARD_DEBUG_UART_BAUDRATE_CORE1 115200U #endif /* BOARD_DEBUG_UART_BAUDRATE_CORE1 */ #define BOARD_CODEC_I2C_BASEADDR I2C4 #define BOARD_CODEC_I2C_CLOCK_FREQ 12000000 #ifndef BOARD_LED_RED_GPIO #define BOARD_LED_RED_GPIO GPIO #endif #define BOARD_LED_RED_GPIO_PORT 1U #ifndef BOARD_LED_RED_GPIO_PIN #define BOARD_LED_RED_GPIO_PIN 6U #endif #ifndef BOARD_LED_BLUE_GPIO #define BOARD_LED_BLUE_GPIO GPIO #endif #define BOARD_LED_BLUE_GPIO_PORT 1U #ifndef BOARD_LED_BLUE_GPIO_PIN #define BOARD_LED_BLUE_GPIO_PIN 4U #endif #ifndef BOARD_LED_GREEN_GPIO #define BOARD_LED_GREEN_GPIO GPIO #endif #define BOARD_LED_GREEN_GPIO_PORT 1U #ifndef BOARD_LED_GREEN_GPIO_PIN #define BOARD_LED_GREEN_GPIO_PIN 7U #endif #ifndef BOARD_SW1_GPIO #define BOARD_SW1_GPIO GPIO #endif #define BOARD_SW1_GPIO_PORT 0U #ifndef BOARD_SW1_GPIO_PIN #define BOARD_SW1_GPIO_PIN 5U #endif #define BOARD_SW1_NAME "SW1" #define BOARD_SW1_IRQ PIN_INT0_IRQn #define BOARD_SW1_IRQ_HANDLER PIN_INT0_IRQHandler #ifndef BOARD_SW2_GPIO #define BOARD_SW2_GPIO GPIO #endif #define BOARD_SW2_GPIO_PORT 1U #ifndef BOARD_SW2_GPIO_PIN #define BOARD_SW2_GPIO_PIN 18U #endif #define BOARD_SW2_NAME "SW2" #define BOARD_SW2_IRQ PIN_INT1_IRQn #define BOARD_SW2_IRQ_HANDLER PIN_INT1_IRQHandler #define BOARD_SW2_GPIO_PININT_INDEX 1 #ifndef BOARD_SW3_GPIO #define BOARD_SW3_GPIO GPIO #endif #define BOARD_SW3_GPIO_PORT 1U #ifndef BOARD_SW3_GPIO_PIN #define BOARD_SW3_GPIO_PIN 9U #endif #define BOARD_SW3_NAME "SW3" #define BOARD_SW3_IRQ PIN_INT1_IRQn #define BOARD_SW3_IRQ_HANDLER PIN_INT1_IRQHandler #define BOARD_SW3_GPIO_PININT_INDEX 1 #define BOARD_SDIF_BASEADDR SDIF #define BOARD_SDIF_CLKSRC kCLOCK_SDio #define BOARD_SDIF_CLK_FREQ CLOCK_GetSdioClkFreq() #define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK #define BOARD_SDIF_IRQ SDIO_IRQn #define BOARD_MMC_VCC_SUPPLY kMMC_VoltageWindows270to360 #define BOARD_SD_CARD_DETECT_PIN 17 #define BOARD_SD_CARD_DETECT_PORT 0 #define BOARD_SD_CARD_DETECT_GPIO GPIO #define BOARD_SD_DETECT_TYPE kSDMMCHOST_DetectCardByHostCD #define BOARD_SDIF_CD_GPIO_INIT() \ { \ CLOCK_EnableClock(kCLOCK_Gpio2); \ GPIO_PinInit(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN, \ &(gpio_pin_config_t){kGPIO_DigitalInput, 0U}); \ } #define BOARD_SDIF_CD_STATUS() \ GPIO_PinRead(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN) /* Board led color mapping */ #define LOGIC_LED_ON 0U #define LOGIC_LED_OFF 1U #define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK #define LED_RED_INIT(output) \ { \ IOCON_PinMuxSet(IOCON, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \ (IOCON_PIO_FUNC0 | IOCON_PIO_MODE_INACT | IOCON_PIO_SLEW_STANDARD | IOCON_PIO_INV_DI | \ IOCON_PIO_DIGITAL_EN | IOCON_PIO_OPENDRAIN_DI)); \ GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */ \ } #define LED_RED_ON() \ GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \ 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED1 */ #define LED_RED_OFF() \ GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \ 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED1 \ \ \ \ \ \ \ \ \ \ \ */ #define LED_RED_TOGGLE() \ GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \ 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED1 */ #define LED_BLUE_INIT(output) \ { \ IOCON_PinMuxSet(IOCON, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \ (IOCON_PIO_FUNC0 | IOCON_PIO_MODE_INACT | IOCON_PIO_SLEW_STANDARD | IOCON_PIO_INV_DI | \ IOCON_PIO_DIGITAL_EN | IOCON_PIO_OPENDRAIN_DI)); \ GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */ \ } #define LED_BLUE_ON() \ GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \ 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED1 */ #define LED_BLUE_OFF() \ GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \ 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED1 */ #define LED_BLUE_TOGGLE() \ GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \ 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED1 */ #define LED_GREEN_INIT(output) \ GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED1 */ #define LED_GREEN_ON() \ GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \ 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED1 */ #define LED_GREEN_OFF() \ GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \ 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED1 */ #define LED_GREEN_TOGGLE() \ GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \ 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED1 */ /*! @brief The WIFI-QCA shield pin. */ #define BOARD_INITGT202SHIELD_PWRON_GPIO GPIO #define BOARD_INITGT202SHIELD_PWRON_PORT 1U #define BOARD_INITGT202SHIELD_PWRON_PIN 8U #define BOARD_INITGT202SHIELD_IRQ_GPIO GPIO #define BOARD_INITGT202SHIELD_IRQ_PORT 1U #define BOARD_INITGT202SHIELD_IRQ_PIN 9U /*! @brief The WIFI-QCA shield pin. */ #define BOARD_INITSILEX2401SHIELD_PWRON_GPIO GPIO #define BOARD_INITSILEX2401SHIELD_PWRON_PORT 1U #define BOARD_INITSILEX2401SHIELD_PWRON_PIN 7U #define BOARD_INITSILEX2401SHIELD_IRQ_GPIO GPIO #define BOARD_INITSILEX2401SHIELD_IRQ_PORT 0U #define BOARD_INITSILEX2401SHIELD_IRQ_GPIO_PIN 15U #if defined(__cplusplus) extern "C" { #endif /* __cplusplus */ /******************************************************************************* * API ******************************************************************************/ void BOARD_InitDebugConsole(void); void BOARD_InitDebugConsole_Core1(void); #if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz); status_t BOARD_I2C_Send(I2C_Type *base, uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *txBuff, uint8_t txBuffSize); status_t BOARD_I2C_Receive(I2C_Type *base, uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize); void BOARD_Accel_I2C_Init(void); status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff); status_t BOARD_Accel_I2C_Receive( uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize); void BOARD_Codec_I2C_Init(void); status_t BOARD_Codec_I2C_Send( uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize); status_t BOARD_Codec_I2C_Receive( uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize); #endif /* SDK_I2C_BASED_COMPONENT_USED */ #if defined(__cplusplus) } #endif /* __cplusplus */ #endif /* _BOARD_H_ */