/*
 * Copyright  2019 NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include "fsl_wm8960_adapter.h"
#include "fsl_codec_common.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/
/*! @brief module capability definition */
#define HAL_WM8960_MODULE_CAPABILITY                                                                               \
    (kCODEC_SupportModuleADC | kCODEC_SupportModuleDAC | kCODEC_SupportModulePGA | kCODEC_SupportModuleHeadphone | \
     kCODEC_SupportModuleLineout | kCODEC_SupportModuleSpeaker)

#define HAL_WM8960_PLAY_CAPABILITY                                                                       \
    (kCODEC_SupportPlayChannelLeft0 | kCODEC_SupportPlayChannelRight0 | kCODEC_SupportPlayChannelLeft1 | \
     kCODEC_SupportPlayChannelRight1 | kCODEC_SupportPlaySourcePGA | kCODEC_SupportPlaySourceDAC |       \
     kCODEC_SupportPlaySourceInput)

#define HAL_WM8960_RECORD_CAPABILITY                                                                    \
    (kCODEC_SupportPlayChannelLeft0 | kCODEC_SupportPlayChannelLeft1 | kCODEC_SupportPlayChannelLeft2 | \
     kCODEC_SupportPlayChannelRight0 | kCODEC_SupportPlayChannelRight1 | kCODEC_SupportPlayChannelRight2)

/*! @brief wm8960 map protocol */
#define HAL_WM8960_MAP_PROTOCOL(protocol)                 \
    ((protocol) == kCODEC_BusI2S ?                        \
         kWM8960_BusI2S :                                 \
         (protocol) == kCODEC_BusLeftJustified ?          \
         kWM8960_BusLeftJustified :                       \
         (protocol) == kCODEC_BusRightJustified ?         \
         kWM8960_BusRightJustified :                      \
         (protocol) == kCODEC_BusPCMA ? kWM8960_BusPCMA : \
                                        (protocol) == kCODEC_BusPCMB ? kWM8960_BusPCMB : kWM8960_BusI2S)

/*! @brief wm8960 map module */
#define HAL_WM8960_MAP_MODULE(module)                                      \
    ((module) == kCODEC_ModuleADC ?                                        \
         kWM8960_ModuleADC :                                               \
         (module) == kCODEC_ModuleDAC ?                                    \
         kWM8960_ModuleDAC :                                               \
         (module) == kCODEC_ModuleVref ?                                   \
         kWM8960_ModuleVREF :                                              \
         (module) == kCODEC_ModuleHeadphone ?                              \
         kWM8960_ModuleHP :                                                \
         (module) == kCODEC_ModuleMicbias ?                                \
         kWM8960_ModuleMICB :                                              \
         (module) == kCODEC_ModuleMic ? kWM8960_ModuleMIC :                \
                                        (module) == kCODEC_ModuleLinein ?  \
                                        kWM8960_ModuleLineIn :             \
                                        (module) == kCODEC_ModuleSpeaker ? \
                                        kWM8960_ModuleSpeaker :            \
                                        (module) == kCODEC_ModuleMxier ?   \
                                        kWM8960_ModuleOMIX :               \
                                        (module) == kCODEC_ModuleLineout ? kWM8960_ModuleLineOut : kWM8960_ModuleADC)

/*******************************************************************************
 * Prototypes
 ******************************************************************************/

/*******************************************************************************
 * Variables
 ******************************************************************************/
static const codec_capability_t s_wm8960_capability = {
    .codecPlayCapability   = HAL_WM8960_PLAY_CAPABILITY,
    .codecModuleCapability = HAL_WM8960_MODULE_CAPABILITY,
    .codecRecordCapability = HAL_WM8960_RECORD_CAPABILITY,
};
/*******************************************************************************
 * Code
 ******************************************************************************/
/*!
 * brief Codec initilization.
 *
 * param handle codec handle.
 * param config codec configuration.
 * return kStatus_Success is success, else initial failed.
 */
status_t HAL_CODEC_WM8960_Init(void *handle, void *config)
{
    assert((config != NULL) && (handle != NULL));

    codec_config_t *codecConfig = (codec_config_t *)config;

    wm8960_config_t *devConfig = (wm8960_config_t *)(codecConfig->codecDevConfig);
    wm8960_handle_t *devHandle = (wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle));

    ((codec_handle_t *)handle)->codecCapability = &s_wm8960_capability;

    /* codec device initialization */
    return WM8960_Init(devHandle, devConfig);
}

/*!
 * brief Codec de-initilization.
 *
 * param handle codec handle.
 * return kStatus_Success is success, else de-initial failed.
 */
status_t HAL_CODEC_WM8960_Deinit(void *handle)
{
    assert(handle != NULL);

    return WM8960_Deinit((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)));
}

/*!
 * brief set audio data format.
 *
 * param handle codec handle.
 * param mclk master clock frequency in HZ.
 * param sampleRate sample rate in HZ.
 * param bitWidth bit width.
 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_SetFormat(void *handle, uint32_t mclk, uint32_t sampleRate, uint32_t bitWidth)
{
    assert(handle != NULL);

    return WM8960_ConfigDataFormat((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)), mclk,
                                   sampleRate, bitWidth);
}

/*!
 * brief set audio codec module volume.
 *
 * param handle codec handle.
 * param channel audio codec play channel, can be a value or combine value of _codec_play_channel.
 * param volume volume value, support 0 ~ 100, 0 is mute, 100 is the maximum volume value.
 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_SetVolume(void *handle, uint32_t playChannel, uint32_t volume)
{
    assert(handle != NULL);

    status_t retVal       = kStatus_Success;
    uint32_t mappedVolume = 0U;

    /*
     * 0 is mute
     * 1 - 100 is mapped to 0x30 - 0x7F
     */
    if (volume != 0U)
    {
        mappedVolume = (volume * (WM8960_HEADPHONE_MAX_VOLUME_vALUE - WM8960_HEADPHONE_MIN_VOLUME_vALUE)) / 100 +
                       WM8960_HEADPHONE_MIN_VOLUME_vALUE;
    }

    if ((playChannel & kWM8960_HeadphoneLeft) || (playChannel & kWM8960_HeadphoneRight))
    {
        retVal = WM8960_SetVolume((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)),
                                  kWM8960_ModuleHP, mappedVolume);
    }

    if ((playChannel & kWM8960_SpeakerLeft) || (playChannel & kWM8960_SpeakerRight))
    {
        retVal = WM8960_SetVolume((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)),
                                  kWM8960_ModuleSpeaker, mappedVolume);
    }

    return retVal;
}

/*!
 * brief set audio codec module mute.
 *
 * param handle codec handle.
 * param channel audio codec play channel, can be a value or combine value of _codec_play_channel.
 * param isMute true is mute, false is unmute.
 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_SetMute(void *handle, uint32_t playChannel, bool isMute)
{
    assert(handle != NULL);

    status_t retVal = kStatus_Success;

    if ((playChannel & kWM8960_HeadphoneLeft) || (playChannel & kWM8960_HeadphoneRight))
    {
        retVal = WM8960_SetMute((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)),
                                kWM8960_ModuleHP, isMute);
    }

    if ((playChannel & kWM8960_SpeakerLeft) || (playChannel & kWM8960_SpeakerRight))
    {
        retVal = WM8960_SetMute((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)),
                                kWM8960_ModuleSpeaker, isMute);
    }

    return retVal;
}

/*!
 * brief set audio codec module power.
 *
 * param handle codec handle.
 * param module audio codec module.
 * param powerOn true is power on, false is power down.
 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_SetPower(void *handle, uint32_t module, bool powerOn)
{
    assert(handle != NULL);

    return WM8960_SetModule((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)),
                            HAL_WM8960_MAP_MODULE(module), powerOn);
}

/*!
 * brief codec set record channel.
 *
 * param handle codec handle.
 * param leftRecordChannel audio codec record channel, reference _codec_record_channel, can be a value or combine value
 of member in _codec_record_channel.
 * param rightRecordChannel audio codec record channel, reference _codec_record_channel, can be a value combine of
 member in _codec_record_channel.

 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_SetRecordChannel(void *handle, uint32_t leftRecordChannel, uint32_t rightRecordChannel)
{
    return kStatus_CODEC_NotSupport;
}

/*!
 * brief codec set record source.
 *
 * param handle codec handle.
 * param source audio codec record source, can be a value or combine value of _codec_record_source.
 *
 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_SetRecord(void *handle, uint32_t recordSource)
{
    return kStatus_CODEC_NotSupport;
}

/*!
 * brief codec module control.
 *
 * param handle codec handle.
 * param cmd module control cmd, reference _codec_module_ctrl_cmd.
 * param data value to write, when cmd is kCODEC_ModuleRecordSourceChannel, the data should be a value combine
 *  of channel and source, please reference macro CODEC_MODULE_RECORD_SOURCE_CHANNEL(source, LP, LN, RP, RN), reference
 *  codec specific driver for detail configurations.
 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_ModuleControl(void *handle, uint32_t cmd, uint32_t data)
{
    return kStatus_CODEC_NotSupport;
}

/*!
 * brief codec set play source.
 *
 * param handle codec handle.
 * param playSource audio codec play source, can be a value or combine value of _codec_play_source.
 *
 * return kStatus_Success is success, else configure failed.
 */
status_t HAL_CODEC_WM8960_SetPlay(void *handle, uint32_t playSource)
{
    assert(handle != NULL);

    return WM8960_SetPlay((wm8960_handle_t *)((uint32_t)(((codec_handle_t *)handle)->codecDevHandle)), playSource);
}