/* * Copyright 2018 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ /*********************************************************************************************************************** * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. **********************************************************************************************************************/ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!GlobalInfo product: Pins v4.1 processor: MIMXRT1064xxxxA package_id: MIMXRT1064DVL6A mcu_data: ksdk2_0 processor_version: 0.0.0 board: MIMXRT1064-EVK pin_labels: - {pin_num: E3, pin_signal: GPIO_EMC_00, label: SEMC_D0, identifier: SEMC_D0} - {pin_num: F3, pin_signal: GPIO_EMC_01, label: SEMC_D1, identifier: SEMC_D1} - {pin_num: F4, pin_signal: GPIO_EMC_02, label: SEMC_D2, identifier: SEMC_D2} - {pin_num: F2, pin_signal: GPIO_EMC_04, label: SEMC_D4, identifier: SEMC_D4} - {pin_num: G4, pin_signal: GPIO_EMC_03, label: SEMC_D3, identifier: SEMC_D3} - {pin_num: G5, pin_signal: GPIO_EMC_05, label: SEMC_D5, identifier: SEMC_D5} - {pin_num: H5, pin_signal: GPIO_EMC_06, label: SEMC_D6, identifier: SEMC_D6} - {pin_num: H4, pin_signal: GPIO_EMC_07, label: SEMC_D7, identifier: SEMC_D7} - {pin_num: H3, pin_signal: GPIO_EMC_08, label: SEMC_DM0, identifier: SEMC_DM0} - {pin_num: C2, pin_signal: GPIO_EMC_09, label: SEMC_A0, identifier: SEMC_A0} - {pin_num: G1, pin_signal: GPIO_EMC_10, label: SEMC_A1, identifier: SEMC_A1} - {pin_num: G3, pin_signal: GPIO_EMC_11, label: SEMC_A2, identifier: SEMC_A2} - {pin_num: H1, pin_signal: GPIO_EMC_12, label: SEMC_A3, identifier: SEMC_A3} - {pin_num: A6, pin_signal: GPIO_EMC_13, label: SEMC_A4, identifier: SEMC_A4} - {pin_num: B6, pin_signal: GPIO_EMC_14, label: SEMC_A5, identifier: SEMC_A5} - {pin_num: B1, pin_signal: GPIO_EMC_15, label: SEMC_A6, identifier: SEMC_A6} - {pin_num: A5, pin_signal: GPIO_EMC_16, label: SEMC_A7, identifier: SEMC_A7} - {pin_num: A4, pin_signal: GPIO_EMC_17, label: SEMC_A8, identifier: SEMC_A8} - {pin_num: B2, pin_signal: GPIO_EMC_18, label: SEMC_A9, identifier: SEMC_A9} - {pin_num: B4, pin_signal: GPIO_EMC_19, label: SEMC_A11, identifier: SEMC_A11} - {pin_num: G2, pin_signal: GPIO_EMC_23, label: SEMC_A10, identifier: SEMC_A10} - {pin_num: A3, pin_signal: GPIO_EMC_20, label: SEMC_A12, identifier: SEMC_A12} - {pin_num: C1, pin_signal: GPIO_EMC_21, label: SEMC_BA0, identifier: SEMC_BA0} - {pin_num: F1, pin_signal: GPIO_EMC_22, label: SEMC_BA1, identifier: SEMC_BA1} - {pin_num: D3, pin_signal: GPIO_EMC_24, label: SEMC_CAS, identifier: SEMC_CAS} - {pin_num: D2, pin_signal: GPIO_EMC_25, label: SEMC_RAS, identifier: SEMC_RAS} - {pin_num: B3, pin_signal: GPIO_EMC_26, label: SEMC_CLK, identifier: SEMC_CLK} - {pin_num: A2, pin_signal: GPIO_EMC_27, label: SEMC_CKE, identifier: SEMC_CKE} - {pin_num: D1, pin_signal: GPIO_EMC_28, label: SEMC_WE, identifier: SEMC_WE} - {pin_num: E1, pin_signal: GPIO_EMC_29, label: SEMC_CS0, identifier: SEMC_CS0} - {pin_num: C6, pin_signal: GPIO_EMC_30, label: SEMC_D8, identifier: SEMC_D8} - {pin_num: C5, pin_signal: GPIO_EMC_31, label: SEMC_D9, identifier: SEMC_D9} - {pin_num: D5, pin_signal: GPIO_EMC_32, label: SEMC_D10, identifier: SEMC_D10} - {pin_num: C4, pin_signal: GPIO_EMC_33, label: SEMC_D11, identifier: SEMC_D11} - {pin_num: D4, pin_signal: GPIO_EMC_34, label: SEMC_D12, identifier: SEMC_D12} - {pin_num: E5, pin_signal: GPIO_EMC_35, label: SEMC_D13, identifier: SEMC_D13} - {pin_num: C3, pin_signal: GPIO_EMC_36, label: SEMC_D14, identifier: SEMC_D14} - {pin_num: E4, pin_signal: GPIO_EMC_37, label: SEMC_D15, identifier: SEMC_D15} - {pin_num: D6, pin_signal: GPIO_EMC_38, label: SEMC_DM1, identifier: SEMC_DM1} - {pin_num: B7, pin_signal: GPIO_EMC_39, label: SEMC_DQS, identifier: SEMC_DQS} - {pin_num: A7, pin_signal: GPIO_EMC_40, label: ENET_MDC, identifier: ENET_MDC} - {pin_num: C7, pin_signal: GPIO_EMC_41, label: ENET_MDIO, identifier: ENET_MDIO} - {pin_num: D7, pin_signal: GPIO_B0_00, label: LCDIF_CLK, identifier: LCDIF_CLK} - {pin_num: E7, pin_signal: GPIO_B0_01, label: LCDIF_ENABLE, identifier: LCDIF_ENABLE} - {pin_num: E8, pin_signal: GPIO_B0_02, label: LCDIF_HSYNC, identifier: LCDIF_HSYNC} - {pin_num: D8, pin_signal: GPIO_B0_03, label: LCDIF_VSYNC, identifier: LCDIF_VSYNC} - {pin_num: C8, pin_signal: GPIO_B0_04, label: 'LCDIF_D0/BT_CFG[0]', identifier: LCDIF_D0} - {pin_num: B8, pin_signal: GPIO_B0_05, label: 'LCDIF_D1/BT_CFG[1]', identifier: LCDIF_D1} - {pin_num: A8, pin_signal: GPIO_B0_06, label: 'LCDIF_D2/BT_CFG[2]', identifier: LCDIF_D2} - {pin_num: A9, pin_signal: GPIO_B0_07, label: 'LCDIF_D3/BT_CFG[3]', identifier: LCDIF_D3} - {pin_num: B9, pin_signal: GPIO_B0_08, label: 'LCDIF_D4/BT_CFG[4]', identifier: LCDIF_D4} - {pin_num: C9, pin_signal: GPIO_B0_09, label: 'LCDIF_D5/BT_CFG[5]', identifier: LCDIF_D5} - {pin_num: D9, pin_signal: GPIO_B0_10, label: 'LCDIF_D6/BT_CFG[6]', identifier: LCDIF_D6} - {pin_num: A10, pin_signal: GPIO_B0_11, label: 'LCDIF_D7/BT_CFG[7]', identifier: LCDIF_D7} - {pin_num: C10, pin_signal: GPIO_B0_12, label: 'LCDIF_D8/BT_CFG[8]', identifier: LCDIF_D8} - {pin_num: D10, pin_signal: GPIO_B0_13, label: 'LCDIF_D9/BT_CFG[9]', identifier: LCDIF_D9} - {pin_num: E10, pin_signal: GPIO_B0_14, label: 'LCDIF_D10/BT_CFG[10]', identifier: LCDIF_D10} - {pin_num: E11, pin_signal: GPIO_B0_15, label: 'LCDIF_D11/BT_CFG[11]', identifier: LCDIF_D11} - {pin_num: A11, pin_signal: GPIO_B1_00, label: LCDIF_D12, identifier: LCDIF_D12} - {pin_num: B11, pin_signal: GPIO_B1_01, label: LCDIF_D13, identifier: LCDIF_D13} - {pin_num: C11, pin_signal: GPIO_B1_02, label: LCDIF_D14, identifier: LCDIF_D14} - {pin_num: D11, pin_signal: GPIO_B1_03, label: LCDIF_D15, identifier: LCDIF_D15} - {pin_num: E12, pin_signal: GPIO_B1_04, label: ENET_RXD0, identifier: ENET_RXD0} - {pin_num: D12, pin_signal: GPIO_B1_05, label: ENET_RXD1, identifier: ENET_RXD1} - {pin_num: C12, pin_signal: GPIO_B1_06, label: ENET_CRS_DV, identifier: ENET_CRS_DV} - {pin_num: B12, pin_signal: GPIO_B1_07, label: ENET_TXD0, identifier: ENET_TXD0} - {pin_num: A12, pin_signal: GPIO_B1_08, label: ENET_TXD1, identifier: ENET_TXD1} - {pin_num: A13, pin_signal: GPIO_B1_09, label: ENET_TXEN, identifier: ENET_TXEN} - {pin_num: B13, pin_signal: GPIO_B1_10, label: ENET_TX_CLK, identifier: ENET_TX_CLK} - {pin_num: C13, pin_signal: GPIO_B1_11, label: ENET_RXER, identifier: ENET_RXER} - {pin_num: D13, pin_signal: GPIO_B1_12, label: SD_CD_SW, identifier: SD_CD_SW} - {pin_num: D14, pin_signal: GPIO_B1_13, label: WDOG_B, identifier: WDOG_B} - {pin_num: C14, pin_signal: GPIO_B1_14, label: SD0_VSELECT, identifier: SD0_VSELECT} - {pin_num: B14, pin_signal: GPIO_B1_15, label: USB_HOST_PWR/BACKLIGHT_CTL, identifier: BACKLIGHT_CTL} - {pin_num: E9, pin_signal: NVCC_GPIO0, label: DCDC_3V3/NVCC_GPIO_3V3} - {pin_num: F10, pin_signal: NVCC_GPIO1, label: DCDC_3V3/NVCC_GPIO_3V3} - {pin_num: J10, pin_signal: NVCC_GPIO2, label: DCDC_3V3/NVCC_GPIO_3V3} - {pin_num: M14, pin_signal: GPIO_AD_B0_00, label: 'USB_HOST_OC/J24[10]'} - {pin_num: H10, pin_signal: GPIO_AD_B0_01, label: 'USB_OTG1_ID/J24[9]'} - {pin_num: M11, pin_signal: GPIO_AD_B0_02, label: 'USB_OTG1_PWR/J24[2]'} - {pin_num: G11, pin_signal: GPIO_AD_B0_03, label: 'USB_OTG1_OC/J24[1]'} - {pin_num: F11, pin_signal: GPIO_AD_B0_04, label: 'CSI_PWDN/J35[17]/BOOT_MODE[0]', identifier: CSI_PWDN} - {pin_num: G14, pin_signal: GPIO_AD_B0_05, label: 'CAN_STBY/BOOT_MODE[1]/Flash_RST/U12[8]', identifier: CAN_STBY} - {pin_num: E14, pin_signal: GPIO_AD_B0_06, label: 'JTAG_TMS/J21[7]/SWD_DIO'} - {pin_num: F12, pin_signal: GPIO_AD_B0_07, label: 'JTAG_TCK/J21[9]/SWD_CLK'} - {pin_num: F13, pin_signal: GPIO_AD_B0_08, label: JTAG_MOD} - {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]'} - {pin_num: G13, pin_signal: GPIO_AD_B0_10, label: 'JTAG_TDO/J21[13]/INT1_COMBO/ENET_INT/J22[6]/U32[11]', identifier: INT1_COMBO} - {pin_num: G10, pin_signal: GPIO_AD_B0_11, label: 'JTAG_nTRST/J21[3]/INT2_COMBO/LCD_TOUCH_INT/J22[3]/U32[9]', identifier: INT2_COMBO} - {pin_num: K14, pin_signal: GPIO_AD_B0_12, label: UART1_TXD, identifier: UART1_TXD} - {pin_num: L14, pin_signal: GPIO_AD_B0_13, label: UART1_RXD, identifier: UART1_RXD} - {pin_num: H14, pin_signal: GPIO_AD_B0_14, label: 'CAN2_TX/U12[1]', identifier: CAN2_TX} - {pin_num: L10, pin_signal: GPIO_AD_B0_15, label: 'CAN2_RX/U12[4]', identifier: CAN2_RX} - {pin_num: J11, pin_signal: GPIO_AD_B1_00, label: 'I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4]', identifier: I2C_SCL_FXOS8700CQ;CSI_I2C_SCL} - {pin_num: K11, pin_signal: GPIO_AD_B1_01, label: 'I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6]', identifier: I2C_SDA_FXOS8700CQ;CSI_I2C_SDA} - {pin_num: L11, pin_signal: GPIO_AD_B1_02, label: 'SPDIF_OUT/J22[7]', identifier: SPDIF_OUT} - {pin_num: M12, pin_signal: GPIO_AD_B1_03, label: 'SPDIF_IN/J22[8]', identifier: SPDIF_IN} - {pin_num: H13, pin_signal: GPIO_AD_B1_08, label: 'AUD_INT/CSI_D9//J35[13]/J22[4]', identifier: CSI_D9} - {pin_num: M13, pin_signal: GPIO_AD_B1_09, label: 'SAI1_MCLK/CSI_D8/J35[11]', identifier: CSI_D8} - {pin_num: L13, pin_signal: GPIO_AD_B1_10, label: 'SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1]', identifier: CSI_D7} - {pin_num: J13, pin_signal: GPIO_AD_B1_11, label: 'SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2]', identifier: CSI_D6} - {pin_num: H12, pin_signal: GPIO_AD_B1_12, label: 'SAI1_RXD/CSI_D5/J35[5]/U13[16]', identifier: CSI_D5} - {pin_num: H11, pin_signal: GPIO_AD_B1_13, label: 'SAI1_TXD/CSI_D4/J35[3]/U13[14]', identifier: CSI_D4} - {pin_num: G12, pin_signal: GPIO_AD_B1_14, label: 'SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12]', identifier: CSI_D3} - {pin_num: J14, pin_signal: GPIO_AD_B1_15, label: 'SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13]', identifier: CSI_D2} - {pin_num: J4, pin_signal: GPIO_SD_B0_00, label: 'SD1_CMD/J24[6]', identifier: SD1_CMD} - {pin_num: J3, pin_signal: GPIO_SD_B0_01, label: 'SD1_CLK/J24[3]', identifier: SD1_CLK} - {pin_num: J1, pin_signal: GPIO_SD_B0_02, label: 'SD1_D0/J24[4]/SPI_MOSI/PWM', identifier: SD1_D0} - {pin_num: K1, pin_signal: GPIO_SD_B0_03, label: 'SD1_D1/J24[5]/SPI_MISO', identifier: SD1_D1} - {pin_num: H2, pin_signal: GPIO_SD_B0_04, label: SD1_D2, identifier: SD1_D2} - {pin_num: J2, pin_signal: GPIO_SD_B0_05, label: SD1_D3, identifier: SD1_D3} - {pin_num: L5, pin_signal: GPIO_SD_B1_00, label: FlexSPI_D3_B, identifier: FlexSPI_D3_B} - {pin_num: M5, pin_signal: GPIO_SD_B1_01, label: FlexSPI_D2_B, identifier: FlexSPI_D2_B} - {pin_num: M3, pin_signal: GPIO_SD_B1_02, label: FlexSPI_D1_B, identifier: FlexSPI_D1_B} - {pin_num: M4, pin_signal: GPIO_SD_B1_03, label: FlexSPI_D0_B, identifier: FlexSPI_D0_B} - {pin_num: P2, pin_signal: GPIO_SD_B1_04, label: FlexSPI_CLK_B, identifier: FlexSPI_CLK_B} - {pin_num: N3, pin_signal: GPIO_SD_B1_05, label: FlexSPI_DQS, identifier: FlexSPI_DQS} - {pin_num: L3, pin_signal: GPIO_SD_B1_06, label: FlexSPI_SS0, identifier: FlexSPI_SS0} - {pin_num: L4, pin_signal: GPIO_SD_B1_07, label: FlexSPI_CLK, identifier: FlexSPI_CLK} - {pin_num: P3, pin_signal: GPIO_SD_B1_08, label: FlexSPI_D0_A, identifier: FlexSPI_D0_A} - {pin_num: N4, pin_signal: GPIO_SD_B1_09, label: FlexSPI_D1_A, identifier: FlexSPI_D1_A} - {pin_num: P4, pin_signal: GPIO_SD_B1_10, label: FlexSPI_D2_A, identifier: FlexSPI_D2_A} - {pin_num: P5, pin_signal: GPIO_SD_B1_11, label: FlexSPI_D3_A, identifier: FlexSPI_D3_A} - {pin_num: M8, pin_signal: USB_OTG1_DN, label: OTG1_DN, identifier: OTG1_DN} - {pin_num: L8, pin_signal: USB_OTG1_DP, label: OTG1_DP, identifier: OTG1_DP} - {pin_num: N7, pin_signal: USB_OTG2_DN, label: OTG2_DN, identifier: OTG2_DN} - {pin_num: P7, pin_signal: USB_OTG2_DP, label: OTG2_DP, identifier: OTG2_DP} - {pin_num: K8, pin_signal: VDD_USB_CAP, label: VDD_USB_3V} - {pin_num: N6, pin_signal: USB_OTG1_VBUS, label: 5V_USB_OTG} - {pin_num: P6, pin_signal: USB_OTG2_VBUS, label: 5V_USB_HS} - {pin_num: L12, pin_signal: GPIO_AD_B1_04, label: 'CSI_PIXCLK/J35[8]/J23[3]', identifier: CSI_PIXCLK} - {pin_num: K12, pin_signal: GPIO_AD_B1_05, label: 'CSI_MCLK/J35[12]/J23[4]', identifier: CSI_MCLK} - {pin_num: J12, pin_signal: GPIO_AD_B1_06, label: 'CSI_VSYNC/J35[18]/J22[2]/UART_TX', identifier: CSI_VSYNC} - {pin_num: K10, pin_signal: GPIO_AD_B1_07, label: 'CSI_HSYNC/J35[16]/J22[1]/UART_RX', identifier: CSI_HSYNC} - {pin_num: M7, pin_signal: POR_B, label: 'RST_TGTMCU_B/POR_B/J21[15]', identifier: RST_TGTMCU_B;POR_B} - {pin_num: N14, pin_signal: VDDA_ADC_3P3, label: VDDA_ADC_3P3_MCU} - {pin_num: P12, pin_signal: VDD_HIGH_IN, label: VDD_HIGH_IN_MCU} - {pin_num: M9, pin_signal: VDD_SNVS_IN, label: VDD_SNVS_IN} - {pin_num: F6, pin_signal: VDD_SOC_IN0, label: VDD_SOC_IN} - {pin_num: H6, pin_signal: VDD_SOC_IN2, label: VDD_SOC_IN} - {pin_num: G6, pin_signal: VDD_SOC_IN1, label: VDD_SOC_IN} - {pin_num: F7, pin_signal: VDD_SOC_IN3, label: VDD_SOC_IN} - {pin_num: F8, pin_signal: VDD_SOC_IN4, label: VDD_SOC_IN} - {pin_num: F9, pin_signal: VDD_SOC_IN5, label: VDD_SOC_IN} - {pin_num: G9, pin_signal: VDD_SOC_IN6, label: VDD_SOC_IN} - {pin_num: H9, pin_signal: VDD_SOC_IN7, label: VDD_SOC_IN} - {pin_num: J9, pin_signal: VDD_SOC_IN8, label: VDD_SOC_IN} - {pin_num: P1, pin_signal: VSS1, label: GND} - {pin_num: E2, pin_signal: VSS2, label: GND} - {pin_num: K2, pin_signal: VSS3, label: GND} - {pin_num: B5, pin_signal: VSS4, label: GND} - {pin_num: N5, pin_signal: VSS5, label: GND} - {pin_num: G7, pin_signal: VSS6, label: GND} - {pin_num: H7, pin_signal: VSS7, label: GND} - {pin_num: J7, pin_signal: VSS8, label: GND} - {pin_num: G8, pin_signal: VSS9, label: GND} - {pin_num: H8, pin_signal: VSS10, label: GND} - {pin_num: J8, pin_signal: VSS11, label: GND} - {pin_num: N8, pin_signal: VSS12, label: GND} - {pin_num: L9, pin_signal: VSS13, label: GND} - {pin_num: B10, pin_signal: VSS14, label: GND} - {pin_num: E13, pin_signal: VSS15, label: GND} - {pin_num: K13, pin_signal: VSS16, label: GND} - {pin_num: A14, pin_signal: VSS17, label: GND} - {pin_num: P14, pin_signal: VSS18, label: GND} - {pin_num: A1, pin_signal: VSS0, label: GND} - {pin_num: J6, pin_signal: NVCC_SD0, label: NVCC_SD, identifier: NVCC_SD} - {pin_num: K5, pin_signal: NVCC_SD1, label: FLASH_VCC, identifier: FLASH_VCC} - {pin_num: F5, pin_signal: NVCC_EMC0, label: DCDC_3V3} - {pin_num: E6, pin_signal: NVCC_EMC1, label: DCDC_3V3} - {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: SD_PWREN} - {pin_num: L1, pin_signal: DCDC_IN0, label: MCU_DCDC_IN_3V3} - {pin_num: L2, pin_signal: DCDC_IN1, label: MCU_DCDC_IN_3V3} - {pin_num: K4, pin_signal: DCDC_IN_Q, label: MCU_DCDC_IN_3V3} - {pin_num: M1, pin_signal: DCDC_LP0, label: VDD_SOC_IN} - {pin_num: M2, pin_signal: DCDC_LP1, label: VDD_SOC_IN} - {pin_num: P11, pin_signal: XTALI, label: XTALI, identifier: XTALI} - {pin_num: N11, pin_signal: XTALO, label: XTALO, identifier: XTALO} - {pin_num: N9, pin_signal: RTC_XTALI, label: RTC_XTALI, identifier: RTC_XTALI} - {pin_num: P9, pin_signal: RTC_XTALO, label: RTC_XTALO, identifier: RTC_XTALO} - {pin_num: N1, pin_signal: DCDC_GND0, label: GND} - {pin_num: N2, pin_signal: DCDC_GND1, label: GND} - {pin_num: J5, pin_signal: DCDC_SENSE, label: VDD_SOC_IN} - {pin_num: K3, pin_signal: DCDC_PSWITCH, label: MCU_DCDC_IN_3V3} - {pin_num: K7, pin_signal: PMIC_ON_REQ, label: PMIC_ON_REQ, identifier: PMIC_ON_REQ} - {pin_num: L7, pin_signal: PMIC_STBY_REQ, label: PERI_PWREN, identifier: PERI_PWREN} - {pin_num: M6, pin_signal: ONOFF, label: ONOFF, identifier: ONOFF} - {pin_num: K6, pin_signal: TEST_MODE, label: GND} - {pin_num: P10, pin_signal: NVCC_PLL, label: VDDA_1P1_CAP} - {pin_num: P8, pin_signal: VDD_HIGH_CAP, label: VDDA_2P5_CAP} - {pin_num: K9, pin_signal: NGND_KEL0, label: GND} - {pin_num: M10, pin_signal: VDD_SNVS_CAP, label: GND} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ #include "fsl_common.h" #include "fsl_iomuxc.h" #include "pin_mux.h" /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitBootPins * Description : Calls initialization functions. * * END ****************************************************************************************************************/ void BOARD_InitBootPins(void) { BOARD_InitPins(); BOARD_InitDEBUG_UART(); } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitPins: - options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} - pin_list: [] * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitPins * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitPins(void) { } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitDEBUG_UART: - options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm, pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitDEBUG_UART * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitDEBUG_UART(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_12_LPUART1_TX, /* GPIO_AD_B0_12 is configured as LPUART1_TX */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_13_LPUART1_RX, /* GPIO_AD_B0_13 is configured as LPUART1_RX */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_12_LPUART1_TX, /* GPIO_AD_B0_12 PAD functional properties : */ 0x10B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 100K Ohm Pull Down Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_13_LPUART1_RX, /* GPIO_AD_B0_13 PAD functional properties : */ 0x10B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 100K Ohm Pull Down Hyst. Enable Field: Hysteresis Disabled */ } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitSDRAM: - options: {coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09} - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10} - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11} - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12} - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13} - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14} - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15} - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16} - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17} - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18} - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23} - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19} - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20} - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21} - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22} - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24} - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27} - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26} - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00} - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01} - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02} - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03} - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04} - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05} - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06} - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07} - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30} - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31} - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32} - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33} - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34} - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35} - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36} - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37} - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08} - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38} - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25} - {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28} - {pin_num: C7, peripheral: SEMC, signal: 'CSX, 0', pin_signal: GPIO_EMC_41} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitSDRAM * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitSDRAM(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_00_SEMC_DATA00, /* GPIO_EMC_00 is configured as SEMC_DATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_01_SEMC_DATA01, /* GPIO_EMC_01 is configured as SEMC_DATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_02_SEMC_DATA02, /* GPIO_EMC_02 is configured as SEMC_DATA02 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_03_SEMC_DATA03, /* GPIO_EMC_03 is configured as SEMC_DATA03 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_04_SEMC_DATA04, /* GPIO_EMC_04 is configured as SEMC_DATA04 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_05_SEMC_DATA05, /* GPIO_EMC_05 is configured as SEMC_DATA05 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_06_SEMC_DATA06, /* GPIO_EMC_06 is configured as SEMC_DATA06 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_07_SEMC_DATA07, /* GPIO_EMC_07 is configured as SEMC_DATA07 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_08_SEMC_DM00, /* GPIO_EMC_08 is configured as SEMC_DM00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_09_SEMC_ADDR00, /* GPIO_EMC_09 is configured as SEMC_ADDR00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_10_SEMC_ADDR01, /* GPIO_EMC_10 is configured as SEMC_ADDR01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_11_SEMC_ADDR02, /* GPIO_EMC_11 is configured as SEMC_ADDR02 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_12_SEMC_ADDR03, /* GPIO_EMC_12 is configured as SEMC_ADDR03 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_13_SEMC_ADDR04, /* GPIO_EMC_13 is configured as SEMC_ADDR04 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_14_SEMC_ADDR05, /* GPIO_EMC_14 is configured as SEMC_ADDR05 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_15_SEMC_ADDR06, /* GPIO_EMC_15 is configured as SEMC_ADDR06 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_16_SEMC_ADDR07, /* GPIO_EMC_16 is configured as SEMC_ADDR07 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_17_SEMC_ADDR08, /* GPIO_EMC_17 is configured as SEMC_ADDR08 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_18_SEMC_ADDR09, /* GPIO_EMC_18 is configured as SEMC_ADDR09 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_19_SEMC_ADDR11, /* GPIO_EMC_19 is configured as SEMC_ADDR11 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_20_SEMC_ADDR12, /* GPIO_EMC_20 is configured as SEMC_ADDR12 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_21_SEMC_BA0, /* GPIO_EMC_21 is configured as SEMC_BA0 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_22_SEMC_BA1, /* GPIO_EMC_22 is configured as SEMC_BA1 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_23_SEMC_ADDR10, /* GPIO_EMC_23 is configured as SEMC_ADDR10 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_24_SEMC_CAS, /* GPIO_EMC_24 is configured as SEMC_CAS */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_25_SEMC_RAS, /* GPIO_EMC_25 is configured as SEMC_RAS */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_26_SEMC_CLK, /* GPIO_EMC_26 is configured as SEMC_CLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_27_SEMC_CKE, /* GPIO_EMC_27 is configured as SEMC_CKE */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_28_SEMC_WE, /* GPIO_EMC_28 is configured as SEMC_WE */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_30_SEMC_DATA08, /* GPIO_EMC_30 is configured as SEMC_DATA08 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_31_SEMC_DATA09, /* GPIO_EMC_31 is configured as SEMC_DATA09 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_32_SEMC_DATA10, /* GPIO_EMC_32 is configured as SEMC_DATA10 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_33_SEMC_DATA11, /* GPIO_EMC_33 is configured as SEMC_DATA11 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_34_SEMC_DATA12, /* GPIO_EMC_34 is configured as SEMC_DATA12 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_35_SEMC_DATA13, /* GPIO_EMC_35 is configured as SEMC_DATA13 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_36_SEMC_DATA14, /* GPIO_EMC_36 is configured as SEMC_DATA14 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_37_SEMC_DATA15, /* GPIO_EMC_37 is configured as SEMC_DATA15 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_38_SEMC_DM01, /* GPIO_EMC_38 is configured as SEMC_DM01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_41_SEMC_CSX00, /* GPIO_EMC_41 is configured as SEMC_CSX00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitCSI: - options: {coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08} - {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09} - {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10} - {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11} - {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12} - {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13} - {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15} - {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14} - {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04} - {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05} - {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06} - {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07} - {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} - {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm, pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow} - {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitCSI * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitCSI(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, /* GPIO_AD_B0_04 is configured as GPIO1_IO04 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, /* GPIO_AD_B1_00 is configured as LPI2C1_SCL */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, /* GPIO_AD_B1_01 is configured as LPI2C1_SDA */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, /* GPIO_AD_B1_04 is configured as CSI_PIXCLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_05_CSI_MCLK, /* GPIO_AD_B1_05 is configured as CSI_MCLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, /* GPIO_AD_B1_06 is configured as CSI_VSYNC */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, /* GPIO_AD_B1_07 is configured as CSI_HSYNC */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_08_CSI_DATA09, /* GPIO_AD_B1_08 is configured as CSI_DATA09 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_09_CSI_DATA08, /* GPIO_AD_B1_09 is configured as CSI_DATA08 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_10_CSI_DATA07, /* GPIO_AD_B1_10 is configured as CSI_DATA07 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_11_CSI_DATA06, /* GPIO_AD_B1_11 is configured as CSI_DATA06 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_12_CSI_DATA05, /* GPIO_AD_B1_12 is configured as CSI_DATA05 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_13_CSI_DATA04, /* GPIO_AD_B1_13 is configured as CSI_DATA04 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_14_CSI_DATA03, /* GPIO_AD_B1_14 is configured as CSI_DATA03 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_15_CSI_DATA02, /* GPIO_AD_B1_15 is configured as CSI_DATA02 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, /* GPIO_AD_B1_00 PAD functional properties : */ 0xD8B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Enabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 22K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, /* GPIO_AD_B1_01 PAD functional properties : */ 0xD8B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Enabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 22K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitLCD: - options: {coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull} - {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitLCD * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitLCD(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 is configured as LCD_CLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 is configured as LCD_ENABLE */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 is configured as LCD_HSYNC */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 is configured as LCD_VSYNC */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 is configured as LCD_DATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 is configured as LCD_DATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 is configured as LCD_DATA02 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 is configured as LCD_DATA03 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 is configured as LCD_DATA04 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 is configured as LCD_DATA05 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 is configured as LCD_DATA06 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 is configured as LCD_DATA07 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 is configured as LCD_DATA08 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 is configured as LCD_DATA09 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 is configured as LCD_DATA10 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 is configured as LCD_DATA11 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 is configured as LCD_DATA12 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 is configured as LCD_DATA13 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 is configured as LCD_DATA14 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 is configured as LCD_DATA15 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 is configured as GPIO2_IO31 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 PAD functional properties : */ 0x01B0B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Enabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 PAD functional properties : */ 0x10B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 100K Ohm Pull Down Hyst. Enable Field: Hysteresis Disabled */ } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitCAN: - options: {coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14} - {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitCAN * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitCAN(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, /* GPIO_AD_B0_14 is configured as FLEXCAN2_TX */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, /* GPIO_AD_B0_15 is configured as FLEXCAN2_RX */ 0U); /* Software Input On Field: Input Path is determined by functionality */ } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitENET: - options: {coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40} - {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41} - {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10} - {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04} - {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05} - {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06} - {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11} - {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07} - {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08} - {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitENET * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitENET(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_04_ENET_RX_DATA00, /* GPIO_B1_04 is configured as ENET_RX_DATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_05_ENET_RX_DATA01, /* GPIO_B1_05 is configured as ENET_RX_DATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_06_ENET_RX_EN, /* GPIO_B1_06 is configured as ENET_RX_EN */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_07_ENET_TX_DATA00, /* GPIO_B1_07 is configured as ENET_TX_DATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_08_ENET_TX_DATA01, /* GPIO_B1_08 is configured as ENET_TX_DATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_09_ENET_TX_EN, /* GPIO_B1_09 is configured as ENET_TX_EN */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_10_ENET_REF_CLK, /* GPIO_B1_10 is configured as ENET_REF_CLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_B1_11_ENET_RX_ER, /* GPIO_B1_11 is configured as ENET_RX_ER */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_40_ENET_MDC, /* GPIO_EMC_40 is configured as ENET_MDC */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_41_ENET_MDIO, /* GPIO_EMC_41 is configured as ENET_MDIO */ 0U); /* Software Input On Field: Input Path is determined by functionality */ } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitUSDHC: - options: {coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05} - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04} - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03} - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02} - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00} - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitUSDHC * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitUSDHC(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, /* GPIO_SD_B0_00 is configured as USDHC1_CMD */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, /* GPIO_SD_B0_01 is configured as USDHC1_CLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, /* GPIO_SD_B0_02 is configured as USDHC1_DATA0 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, /* GPIO_SD_B0_03 is configured as USDHC1_DATA1 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, /* GPIO_SD_B0_04 is configured as USDHC1_DATA2 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, /* GPIO_SD_B0_05 is configured as USDHC1_DATA3 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitHyperFlash: - options: {coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07} - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10} - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08} - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09} - {pin_num: L5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA3, pin_signal: GPIO_SD_B1_00} - {pin_num: M5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA2, pin_signal: GPIO_SD_B1_01} - {pin_num: M3, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA1, pin_signal: GPIO_SD_B1_02} - {pin_num: M4, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA0, pin_signal: GPIO_SD_B1_03} - {pin_num: P2, peripheral: FLEXSPI, signal: FLEXSPI_B_SCLK, pin_signal: GPIO_SD_B1_04} - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06} - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11} - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitHyperFlash * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitHyperFlash(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_00_FLEXSPIB_DATA03, /* GPIO_SD_B1_00 is configured as FLEXSPIB_DATA03 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_01_FLEXSPIB_DATA02, /* GPIO_SD_B1_01 is configured as FLEXSPIB_DATA02 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_02_FLEXSPIB_DATA01, /* GPIO_SD_B1_02 is configured as FLEXSPIB_DATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_03_FLEXSPIB_DATA00, /* GPIO_SD_B1_03 is configured as FLEXSPIB_DATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_04_FLEXSPIB_SCLK, /* GPIO_SD_B1_04 is configured as FLEXSPIB_SCLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, /* GPIO_SD_B1_05 is configured as FLEXSPIA_DQS */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, /* GPIO_SD_B1_06 is configured as FLEXSPIA_SS0_B */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, /* GPIO_SD_B1_07 is configured as FLEXSPIA_SCLK */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, /* GPIO_SD_B1_08 is configured as FLEXSPIA_DATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, /* GPIO_SD_B1_09 is configured as FLEXSPIA_DATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, /* GPIO_SD_B1_10 is configured as FLEXSPIA_DATA02 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, /* GPIO_SD_B1_11 is configured as FLEXSPIA_DATA03 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ } /*********************************************************************************************************************** * EOF **********************************************************************************************************************/